This genuine 6-inch surface heating element provides the heat needed for cooking on compatible electric ranges and cooktops. Designed with a tilt-lock hinge mounting system, it delivers consistent heat distribution for everyday cooking tasks such as boiling, simmering, and frying. Replacing a worn or failed surface element can help restor...Read moree proper burner performance when the burner no longer heats, heats unevenly, or cycles inconsistently. The element features a durable 3-wire design, operates at 240 volts, and delivers approximately 1,325 watts of heating power. Installation typically involves disconnecting power to the appliance, lifting the element from the receptacle, disconnecting the terminal connections, installing the replacement element, and restoring power to test operation. The element measures approximately 14 inches long, 7.5 inches wide, and 2 inches high and weighs approximately 1 pound.
This tilt lock hinge mounted surface element kit includes an 8 inch element, three wire, 2450 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The lower bake element burned out.
67 of 72 peoplefound this instruction helpful.
Carlos from Southaven, MS
Really Easy
Less than 15 mins
Nutdriver
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, reconnected the wires to the new element, reattached it to the oven and voila!
It worked. What was really cool, once I ordered the part, I received it in only two work days!
Goo
... Read mored job folks!
Read less
Was this helpful?
Thank you for voting!
Needed to replace Drip Pans and Trim Rings for old stove
40 of 47 peoplefound this instruction helpful.
Cynthia from Tampa, FL
Really Easy
Less than 15 mins
Repair was simple (just lift off the old and put on the new). What was pleasantly surprising was how quickly I received the parts (amazing)!
Lastly, I've been looking for the correct parts/sizes in stores for years (yes, I should have tried this sooner). I was delighted to finally find a place that actually had the correct
... Read moreparts.
Hardest part was getting the wrong element and having to send it back and reordering correct one....too many variables. Two screws inside the oven removed, pull out range and take off back and attach new element to plug ins!