ILC3706056 Industrial Air Compressor - Overview

This is a genuine OEM sourced replacement valve kit designed for use with Powermate equipment. The purpose of the valve plate is to allow air into the cylinder. Once the piston starts traveling up the reeds on the valve plate open and the air is sent into the tank. Over time valves and gaskets will become worn and would need to be replace...Read mored to keep your equipment running well. To complete this repair you would need a wrench set and a screwdriver to take off the housing and the cylinder head. Keep in mind this high-quality valve plate assembly is made of durable metal and is sold as an individual component.

This is an authentic replacement part manufactured for use with Powermate electric air compressors. The head gasket is used to form a seal at the connection between the valve plate and the cylinder head. This head gasket is available as an individual replacement part, please see model diagram for associative parts.

It is a genuine item that is supplied by the original equipment manufacturer for use with Powermate air compressors. This is a high-quality replacement for a missing or damaged gasket which provides an air-tight seal for the cylinder, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. It is made of high-quality composite material and is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with electric two stage air compressors made by Powermate. When the air compressor reaches the maximum air pressure, this valve bleeder releases the air. It is recommended to review your models diagram to verify the parts compatibility. This part is sold individually and made of durable material.

This authentic item is supplied directly from the original equipment manufacturer for use with air compressors made by Powermate and Husky. The flywheel attaches to the oil seal and the carrier. When replacing this part a socket set and a wrench set might be required during the installation process. It is made out of metal and will need to be replaced if it breaks. This item is sold individually.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Powermate air compressors. This is an identical replacement for a faulty or missing electric motor which is utilized to build up the pressure, over time components may wear out and it may begin to fail eventually requiring a replacement. It is a high-quality part and is sold individually.

The petcock attaches to the bushing and the o-ring and is made of metal. This part is an OEM from Powermate for use in air compressors. Keep in mind this high-quality part is sold individually. An adjustable wrench might be needed during the installation process. This item may become broken or stripped and will need to be replaced.

It is a genuine replacement part that is supplied by the original equipment manufacturer for use with Powermate air compressors. The purpose of the o-ring is to provide an air-tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your unit for the correct location and application of this hardware. I...Read moret is a durable component which is made of high-quality rubber material and it is sold individually.