HX541200 Campbell Hausfeld Compressor - Overview

This is a genuine manufacturer sourced replacement regulator. It is specially designed for Campbell Hausfeld air compressors. This part adjusts the pressure of the air coming from the tank to the desired level. Please note, this only includes the metal regulator and the plastic knob. The valves, gauges and the pressure switch are all sold...Read more separately. To complete this repair you would need an a screwdriver, pliers and a set of wrenches. • First make sure to unplug the compressor • Drain the air from the tank • Disconnect all the valves and gauges from the regulator • Remove the old regulator • Secure the new regulator assembly • Reassemble and test the new regulator

This Power Cord and Plug Assembly is an OEM sourced part for air compressors. It is wired to the electric motor in order to provide power from a standard outlet. This part is black, consists of a metal wire in a rubber insulated cable, and is sold individually. Depending on how worn it is, your compressor may no longer get power or may ...Read morehave sparks coming from it when it needs to be replaced. If you notice any visible damage such as exposed wires, cracks, or frays, it should be replaced. You will need a screwdriver, pliers, and a wrench to complete this repair. Customers rate this repair as Easy.

This ASME safety valve is constructed of high-qualty metal, and is made for use with many air compressor models. Fastened to the manifold, the safety valve diminishes air pressure when the pump is not shut off at the proper setting. This important component is sold individually. A screwdriver, adjustable wrench and a pair of pliers are of...Read moreten necessary for the removal and replacement. Please refer to the specific manual for additional repair information.

This authentic item is supplied directly from the original equipment manufacturer for use with Campbell Hausfeld compressors. It is an identical replacement for a missing or a damaged components that were installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct installation of these parts. ...Read moreThis high-quality kit is sold individually, note it includes two plastic wheels and the hardware to secure them.

This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to d...Read morerain your tank after each use—particularly if you tend to leave air in the tank for extended periods. Regular draining helps extend the life of your compressor and maintain its performance. Be sure to open the valve regularly to prevent water buildup and potential tank corrosion.

The check valve attaches to the tank and is made out of metal. This part is an OEM sourced directly from the manufacturer for use in air compressors made by Campbell Hausfeld. This item is available individually. You may need a wrench and a set of pliers when replacing this part. It will need to be replaced if it leaks or becomes broken.

This is an authentic Campbell Hausfeld replacement part, sourced from the original manufacturer for use with air compressors. The special gasket kit is commonly used to for seals at the connections in the cylinder head. This gasket kit is sold as an individual replacement part kit and the kits are sold individually.