This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. This part has been updated by the manufacturer and may appear different t...
This plug button is designed for use with various makes and models of refrigerators and is made of white plastic. Used for cosmetic purposes to fill and cover the securing screw of the door handle, th...
This defrost thermostat and cable assembly prevents ice buildup on the evaporator coils. During the defrost cycle, they conduct heat to melt any accumulated ice. The thermostat senses the coil tempera...
This fan blade is compatible with different makes and models of freezers and is sold as an individual part. This fan blade attaches within the freezer compartment near the condenser coils and is respo...
I took the advice off of your website about the only thing that will fix the problem is change the run capacitor. I felt assured that I would have a working refrigerator freezer after making this change. I was pretty disheartened when it didn`t solve anything. I was not going to take the new part back out after the sma
... Read morell challenge of putting it in. The next day I found out how to test the old capacitor and it was still good. I will just have to eat the $49. I did learn not to take advice from a website even if it seems like a sure thing
Instructions say run capacitor is by motor, but on this frige its in the refrigerator compartment. The capacitors looks different, one square and the other long
Simply take off the back panel. Remove the old run capacitor which is attached to the compressor by a white part. It pulls right off. You will have to unplug two wires. I took a pic to ensure I plugged the wires back up the correct way. Then I attached the new capacitor to the white part and put on the sleeve that was included, plugge
... Read mored it back into the compressor and zip tied the excess part of the sleeve. Once done plug fridge back up (always unplug electric devices when doing maintenance) to check before replacing back panel. It may take a few minutes before it kicks on.
