HU502000AV Campbell Hausfeld Compressor - Overview

This is a genuine OEM sourced replacement valve kit designed for use with Campbell Hausfeld air compressors. Includes: 2 valve plates, 2 reed valves & o-ring gaskets. The purpose of the valve plate is to allow into the cylinder. Once the piston starts traveling up the reeds on the valve plate open and air is sent into the air tank. Over...Read moretime the valves and gaskets will become worn and would need to be replaced. To complete this repair you would need a wrench set and a screwdriver.

This is a genuine manufacturer sourced replacement regulator. It is specially designed for Campbell Hausfeld air compressors. This part adjusts the pressure of the air coming from the tank to the desired level. Please note, this only includes the metal regulator and the plastic knob. The valves, gauges and the pressure switch are all sold...Read more separately. To complete this repair you would need an a screwdriver, pliers and a set of wrenches. • First make sure to unplug the compressor • Drain the air from the tank • Disconnect all the valves and gauges from the regulator • Remove the old regulator • Secure the new regulator assembly • Reassemble and test the new regulator

Please Note: Some previous models used a Piston/Sleeve Assy. This is NLA by the manufacturer. - Includes Figures 4-9, 15, 27 and 28

The pressure switch tells your compressor when to start and stop building up the pressure. This is an authentic manufacturer-supplied replacement part that is specially designed for Campbell Hausfeld air compressors. Common symptoms of a faulty pressure switch include a motor that continues to run regardless of pressure until the safety v...Read morealve opens or a compressor that simply will not turn on at all. Please note, this high-quality part is sold as an individual item. Make sure the drain the air from the tank before starting this repair.

This authentic item is supplied directly from the original equipment manufacturer for use with Campbell Hausfeld compressors. It is an identical replacement for a missing or a damaged components that were installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct installation of these parts. ...Read moreThis high-quality kit is sold individually, note it includes two plastic wheels and the hardware to secure them.

This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to d...Read morerain your tank after each use—particularly if you tend to leave air in the tank for extended periods. Regular draining helps extend the life of your compressor and maintain its performance. Be sure to open the valve regularly to prevent water buildup and potential tank corrosion.

This is an authentic replacement part manufactured for use with Campbell Hausfeld air compressors. The special capacitor is commonly used to aid in starting the electric motor. This capacitor is available as an individual replacement part, please see model diagram for associative parts.

The check valve attaches to the tank and is made out of metal. This part is an OEM sourced directly from the manufacturer for use in air compressors made by Campbell Hausfeld. This item is available individually. You may need a wrench and a set of pliers when replacing this part. It will need to be replaced if it leaks or becomes broken.

This is a genuine part that is supplied by the original manufacturer for use with Campbell Hausfeld compressors. When plugged in, the power cord transfers power to the unit. This part is made of flexible plastic and metal, it is also sold individually. For installation, you will need a screwdriver to remove any covers or shrouds, and a pair of needle nose pliers to aid you.