HTD-2520PF Tanaka Hedge Trimmer - Overview

This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sold individually. This part will be found in various locations, depending on your model; refer to your owners manual to locate it on your mach...Read moreine, but is commonly found on the side of the air cleaner or carburetor. To complete this repair, you will need a screwdriver. The Purge Bulb needs to be replaced when it is cracked or damaged. It will become fatigued through regular use and may leak fuel when it is malfunctioning. Customers rated this repair as Easy.

This individually sold grommet is a genuine OEM part and is used for a variety of different small engine/outdoor lawn equipment. The return fuel line from the carburetor is installed through this grommet, which creates a seal to prevent future leaks and ignition issues. Over time and through exposure to fuel, the grommet can wear down, le...Read moreading to cracks, tears, and missing pieces. If you notice fuel is leaking during operation, or are having issues with starting the engine, this grommet may be the cause. Depending on your model, installing the return line in the grommet and then installing both together in the fuel tank may be easiest, rather than installing them separately.

Also known as a priming bulb, this OEM replacement part is an individually sold rubber primer bulb. Since it is made of rubber, it will eventually lose its elasticity and crack or break,and need replacing. It is designed for use with a variety of different small engine equipment and is also known as a purge bulb. Pressing this primer bulb...Read more forces fuel through the fuel line and into the carburetor from the fuel tank. Once the carburetor is has a sufficient level of fuel, any excess fuel will be forced back into the fuel tank through the return line attached to the carburetor. If your primer bulb has a darker appearance or has lost its elasticity and does not return to its original shape, it means the rubber will likely soon crack, which will lead to fuel leaking into the engine and ignition system. To replace your primer bulb, simply remove the outside cover and primer bulb cover and replace the bulb within its housing.

This is a genuine OEM replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article and vide...Read moreo on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This fuel pipe is manufactured for Tanaka gas powered handheld equipment. It is a genuine OEM sourced item, not an aftermarket imitation. This fuel pipe allows the gas to flow between the tank and the carburetor. By pressing the primmer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into th...Read moree tank through the fuel return line. It is made from flexible clear plastic and it is sold individually.

This item has been OEM sourced to ensure a high level of quality. The clip is intended to be used with trimmers and blowers from Hitachi and Tanaka. The metal clip is part of the fuel system. The clip is used to fasten the fuel filter and the fuel line assembly. This part is priced as an individual replacement part.

This is a replacement part sourced directly from the manufacturer for Tanaka grass trimmers. The gas cap covers the opening of the grass trimmer tank and prevents gas from spilling out. To install or replace the gas cap requires no tools, simply twist the cap into place on the tank. This part is made of plastic and is sold individually.

This is a genuine OEM sourced element-cleaner designed for Tanaka gas powered equipment. It is used to filter out dust and other contaminants from going into the engine. Please note, this foam element-cleaner is sold individually. To replace this filter you should only need a screwdriver. • Make sure to disconnect the spark plug • R...Read moreemove the cover screw • Take off the cover and replace the filter element • Reassemble and test the unit

This is a genuine Tanaka replacement part that has been sourced from the original manufacturer to be used with trimmers, edgers, hedge trimmers, blowers, and gas powered drills. The plastic pulley is used to store the starter rope and to engage the starter cam. This item is sold as an individual replacement part.

This piston ring is a small metal ring in an engine that seals the gap between the piston and the cylinder wall. It prevents the escape of combustion gases and maintains compression. When damaged, oil will leak into the combustion chamber and cause performance problems within the engine. You may experience rough running and a loss of powe...Read morer or notice that blue smoke is coming out from the exhaust when this happens. To remove the piston ring from your machine, you need to detach the piston from the engine. Using a small screwdriver, pry the damaged piston ring away from the piston and slide it off. Be careful not to scratch the piston nor the cylinder walls during this process. You may also need to compress the ring to remove or install it onto the piston. Please note that this authentic OEM replacement part is sold individually. It is recommended to replace your piston rings all at once as they wear out at the same rate, so be sure to read your user manual and confirm how many rings your machine will need.

This replacement fuel pipe assembly is a genuine OEM sourced item that is designed for Tanaka power equipment. The purpose of the fuel pipe is to to deliver fuel from the tank into the carburetor. The filter is situated inside the fuel tank, with the fuel line extending through an existing hole in the fuel tank. It is then connected to th...Read moree primer bulb which will purge the air out of the carburetor. By pressing the primmer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into the tank through the fuel return line. Please note one durable plastic fuel pipe with a rubber grommet is included per order.

This starter rope is an authentic replacement part provided by the original equipment manufacturer. It is frequently used for yard equipment such as trimmers. This rope is used to manually start the engine. It is sold individually, and it should be replaced if it is frayed or beginning to wear out.