HS563403AJ (2006) Campbell Hausfeld Compressor - Overview

Genuine Campbell Hausfeld replacement part, this item is sold individually. The ST033001AV Compression Nut is used to attach the copper tubing to certain components of the compressors listed below. Along with the Compression Nut you will need to use a compression sleeve ( or Ferrule) to seal the tube from leaking air. The Compression Nut will go on the tubing first then the Ferrule will slide into the nut.

This is an authentic OEM part. The 1/2 compression sleeve is compatible with many air compressor machines. With the compression nut, this item helps to secure the exhaust tube to the front shroud. An adjustable wrench is necessary for the replacement. The compression sleeve is sold individually.

This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to d...Read morerain your tank after each use—particularly if you tend to leave air in the tank for extended periods. Regular draining helps extend the life of your compressor and maintain its performance. Be sure to open the valve regularly to prevent water buildup and potential tank corrosion.

This air filter element is supplied directly from the original equipment manufacturer. Made for use with many air compressors, this item is fitted onto the air filter housing next to the cylinder head. The plastic framed, pleated filter material captures debris from the air as it goes into the compressor. The air filter element is sold individually. Pliers are helpful with making the replacement.

This is a genuine Campbell Hausfeld replacement part that has been sourced from the original manufacturer to be used with air compressors. The oil level gauge attaches to the crankcase housing and is used to provide an indication of the amount of oil inside the case. This part is priced as a single item.

It is an authentic replacement item that is specially supplied by original equipment manufacturer for use with Campbell Hausfeld air compressors. This is the push-in fitting for the check valve which is sold separately. It is a quick-connect style fitting that is designed to accommodate for 1/4

The check valve attaches to the ferrule and the compression nut. It is a genuine item that is supplied by the original equipment manufacturer for use with Campbell Hausfeld compressors. This part is made of metal and is available individually. During replacement, it may require a wrench to help install this part correctly. It will require replacing if it becomes broken.

This is an OEM replacement part sourced from the manufacturer. The Campbell Hausfeld air filter housing assembly is constructed of durable metal, holding an air filter element inside. This part is compatible with many air compressor machines, and is secured into the cylinder head, working to absorb moisture and particulates. This part is ...Read moresold individually. A screwdriver and a wrench may be needed in the removal and replacement.

This is an authentic replacement part manufactured for use with Campbell Hausfeld air compressors. The pressure gauge is used to measure the amount of pressurized air inside the tank. The guage has a plastic housing and clear cover. The guage is threaded and may require a wrench to install, please note the guage is sold individually.