HN90-OLD Max Nailer - Overview

This part is an OEM from the MAX manufacturer. The rubber washer 7 is compatible with many nailer devices. This item often secures the step pin in the feed pawl. It is recommended to refer to specific manual and diagrams for repair instruction. The rubber washer 7 is sold individually. A hex key and a wrench are helpful in making the replacement.

This is an identical replacement for a damaged or a missing spring that was installed on a new unit. It is commonly utilized to apply tension on the connected components. Keep in mind this high-quality part is made of durable metal and is sold individually. This authentic compression spring is supplied by the original equipment manufactur...Read moreer for Max nailers. You may need pliers and a screwdriver to perform this repair. Check the diagrams for your model to ensure the correct replacement.

This is a genuine OEM sourced part which is specially designed for use with Max nailers. It is an identical replacement for a missing or faulty spring that was installed on a new unit. The part helps to apply tension, please make sure to refer to the appropriate diagrams of your model for the exact location and application of this hardwar...Read moree. Keep in mind this high-quality spring is made of durable metal and is sold individually. Note, the #KK23710 Comp. Spring is sold separately.

This is an original Max replacement part. The pin is designed by the manufacturer for use in nailers. This part is made of metal, and is used to secure the door on the nose assembly. You may require pliers or a punch set when replacing this item. This part is sold individually.

This is an authentic Max replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers and staplers. The special lever is used to actuate the trigger valve when the trigger is pressed. This item is available as an individual replacement part, please see illustrated diagram for associative parts.

This is a special item that provides a tight fit between connected parts. Over time it may wear out, get damaged or lost eventually requiring a replacement. Check the appropriate diagrams for your model to ensure the proper repair procedure. This high-quality washer is made of durable rubber material and is sold as an individual item. It is a genuine manufacturer-supplied item that is made for Max nailers.

This is a special component which helps to provide a tight seal between connected parts. Over time it may wear out, get damaged or lost eventually requiring a replacement. Check the appropriate diagrams for your model to ensure the proper repair procedure. This high-quality o-ring is made of durable rubber material and is sold as an individual item. It is a genuine OEM item that is made for Max nailers.

This is a genuine manufacturer-sourced replacement part which is specially designed for Max sanders. The purpose of this spring is to apply tension on the connected component. If the hardware is worn or damaged, this will provide an identical replacement for the original component that was installed on a new unit. Refer to the appropriate...Read more diagrams for your model to ensure the exact location and the correct repair procedure. A screwdriver might be needed to remove and resecure the hardware when replacing this spring.

This is an authentic Max replacement part manufactured for use with pneumatic nailers and pinners. The compression ring is commonly used to provide compression between the trigger lock and trigger lock dial. This compression spring is available as an individual replacement part, please see model diagram for associative parts.

This is an authentic Max replacement part, sourced from the original manufacturer for use with pneumatic nailers and staplers. The special filter connects to the inner portion of the end cap to prevent dust and debris from entering the nailer through the air hose intake. This item is available as an individual replacement part.