HM751000 Campbell Hausfeld Compressor - Overview

This ASME safety valve is constructed of high-qualty metal, and is made for use with many air compressor models. Fastened to the manifold, the safety valve diminishes air pressure when the pump is not shut off at the proper setting. This important component is sold individually. A screwdriver, adjustable wrench and a pair of pliers are of...Read moreten necessary for the removal and replacement. Please refer to the specific manual for additional repair information.

This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to d...Read morerain your tank after each use—particularly if you tend to leave air in the tank for extended periods. Regular draining helps extend the life of your compressor and maintain its performance. Be sure to open the valve regularly to prevent water buildup and potential tank corrosion.

It is a genuine manufacturer-sourced component that is specially designed for use with Campbell Hausfeld portable air compressors. This part adjusts the pressure of the air coming from the tank to the desired level, unfortunately, over time it may wear out or get damaged eventually requiring a replacement. Keep in mind it is a high-qualit...Read morey part which is made of durable materials and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this regulator.

This is a genuine part that is supplied by the original manufacturer for use with Campbell Hausfeld compressors. When plugged in, the power cord transfers power to the unit. This part is made of flexible plastic and metal, it is also sold individually. For installation, you will need a screwdriver to remove any covers or shrouds, and a pair of needle nose pliers to aid you.

This genuine OEM sourced replacement pressure switch is specially designed for Campbell Hausfeld air compressors. The purpose of this component is to control when the compressor should start and stop building up pressure. If it is leaking air the pressure switch should be replaced for a compressor to operate as intended. The default setti...Read moreng of this pressure switch are 105psi on and 140psi off. Keep in mind this high-quality item is sold individually.