HL423200 (2007) Campbell Hausfeld Compressor - Overview

This is a genuine manufacturer sourced replacement regulator. It is specially designed for Campbell Hausfeld air compressors. This part adjusts the pressure of the air coming from the tank to the desired level. Please note, this only includes the metal regulator and the plastic knob. The valves, gauges and the pressure switch are all sold...Read more separately. To complete this repair you would need an a screwdriver, pliers and a set of wrenches. • First make sure to unplug the compressor • Drain the air from the tank • Disconnect all the valves and gauges from the regulator • Remove the old regulator • Secure the new regulator assembly • Reassemble and test the new regulator

This ASME safety valve is constructed of high-qualty metal, and is made for use with many air compressor models. Fastened to the manifold, the safety valve diminishes air pressure when the pump is not shut off at the proper setting. This important component is sold individually. A screwdriver, adjustable wrench and a pair of pliers are of...Read moreten necessary for the removal and replacement. Please refer to the specific manual for additional repair information.

This item is an original part from Campbell Hausfeld for use in compressors. The pressure switch unloader valve connects to the pressure switch. A wrench set and a screwdriver may be necessary during the installation of this part. The valve is made out of metal and will need to be replaced if it breaks since it can cause air leaks. This item is priced individually but also includes three nuts.

This authentic item is supplied directly from the original equipment manufacturer for use with Campbell Hausfeld compressors. It is an identical replacement for a missing or a damaged components that were installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct installation of these parts. ...Read moreThis high-quality kit is sold individually, note it includes two plastic wheels and the hardware to secure them.

This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to d...Read morerain your tank after each use—particularly if you tend to leave air in the tank for extended periods. Regular draining helps extend the life of your compressor and maintain its performance. Be sure to open the valve regularly to prevent water buildup and potential tank corrosion.

This is a genuine part that is supplied by the original manufacturer for use with Campbell Hausfeld compressors. When plugged in, the power cord transfers power to the unit. This part is made of flexible plastic and metal, it is also sold individually. For installation, you will need a screwdriver to remove any covers or shrouds, and a pair of needle nose pliers to aid you.

An authentic manufacturer-sourced replacement part that is specially designed for use with Campbell Hausfeld air compressors. These special components are secured to the main frame helping to reduce vibrations from a working engine, over time the material may begin to deteriorate and crack eventually requiring replacement. It is a high-qu...Read moreality kit which includes two durable rubber feet and the hardware to secure them.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Campbell Hausfeld compressors. This is a high-quality replacement for a missing or a faulty oil fill/breather kit that was originally installed on a new unit. The breather allows the air into the air container while keeping the oil inside....Read more Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this part is made of durable plastic and is sold individually. Note, it includes a rubber o-ring.