HJ300100DI Campbell Hausfeld Compressor - Overview

This is an original Campbell Hausfeld replacement part manufactured for use with air compressors. The check valve is a one-way valve that allows air into the tank and prevents compressed air from bleeding out of the tank. A broken check valve will not allow the tank to stay at the set pressure, causing the motor to keep running which can burn out the motor. This check valve is sold individually.

Sourced directly from the manufacturer, this plug is an exact replacement part for a variety of air compressors. This part is sold individually, not as part of a kit or assembly. It is gold, made of metal, and will be found on the pressure switch. This part will leak when it has become defective and will need to be replaced if it is dam...Read moreaged or worn. When you install the part, apply Teflon tape to the threads before tightening it in place. You will need a wrench to complete this repair. Customers rate this repair as Easy.

This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to d...Read morerain your tank after each use—particularly if you tend to leave air in the tank for extended periods. Regular draining helps extend the life of your compressor and maintain its performance. Be sure to open the valve regularly to prevent water buildup and potential tank corrosion.

This is an original replacement part sourced directly from the manufacturer. The exhaust tube kit is found in air compressors from Campbell Hausfeld. This part is made of flexible, braided metal, and is used to carry exhaust air out of the machine. You may require a wrench when replacing this product. This item is sold as an individual replacement part.

This is a genuine OEM sourced part used on many compressor machines. The easy start kit is constructed of heavy-duty metal, and is sold individually. This kit includes the elbow fitting and the pipe nipple with the easy start valve. These components are fastened onto the ferrule and exhaust tube. You may require an adjustable wrench, scre...Read morewdriver, Allen wrench and pliers for the replacement. Please refer to the manual for safety and repair instructions.

This unloader valve is an original part from Campbell Hausfeld. The metal and plastic component is designed for use with the 200 PSI Portable ASME Air Compressor devices. The unloader valve is fitted onto the pressure switch, pulling away the unneeded air in the lines and pump. A hex key and pliers may be required for making the replacement. Please refer to the manual for further repair and safety instructions.

This is a genuine part that is supplied by the original manufacturer for use with Campbell Hausfeld compressors. When plugged in, the power cord transfers power to the unit. This part is made of flexible plastic and metal, it is also sold individually. For installation, you will need a screwdriver to remove any covers or shrouds, and a pair of needle nose pliers to aid you.