This is a lower rack roller for your dishwasher. It attaches in the lower roller assembly on the bottom of your rack to allow the rack to smoothly slide in and out. This replacement part is 1.5 inches...
This part is a replacement gasket for your dishwasher. The gasket creates a seal at the bottom of the dishwasher tub, so water does not leak out while the dishwasher is running. If you notice water le...
Note: This "Service Rack" fits numerous models. Per factory, on some models, it may be necessary to move the silverware basket to the inside of the rack along the right side.
The tub gasket, also known as the door gasket runs along the perimeter of your dishwasher basin and creates a seal that prevents water from leaking out when the tub is full. If you notice water on the...
This dishrack is for dishwashers. The dishrack holds the dishes in place during the dishwashing cycle. Follow the instructions in the manual when installing this part.
This is an end cap for a dishwasher rack. This part is about 2.5 inches long, is black, and is made of plastic. You may need to replaced this part if it is broken, or if your dishwasher rack continuou...
This part is the replacement carrier roller for your dishwasher. It is also known as the wheel support. It is made of gray plastic and is approximately 5 inches by 2 inches. The carrier roller support...
This is a genuine GE dishwasher leveling screw. It operates as a leg on the bottom of your dishwasher, and can be screwed in and out to raise and lower the height of the dishwasher. It is made of meta...
This dishwasher latch strike is a manufacturer-approved replacement part for your appliance. The latch strike is an important component in your dishwasher door assembly, and adds an extra layer of sec...
$8.06
In Stock
Questions And Answers for HDF330PGR3WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jose
May 25, 2023
No power in the main control
For model number HDF330PGR3WW
Hello Jose, thank you for reaching out. First, make sure power is coming to the dishwasher. If the dishwasher has power but the main control board does not, then the issue is with the main control board. We recommend you replace the control board, part number PS16762494. We hope this solves your problem!
How do you load liquid Rinse Aide included with installation packet
For model number HDF330PGR3WW
Hi Kenton, thank you for reaching out. The rinse agent dispenser holds 3.5 oz. (104 ml) of rinse agent. Under normal conditions, this will last approximately one month. Make sure the dishwasher door is fully open. Open the rinse agent dispenser door. Slowly add rinse agent until the cup is full. You may need to pause several times to allow rinse aid to settle. NOTE: Indicator window does not light up. Clean up any spilled rinse agent with a damp cloth to prevent foam from forming inside the dishwasher. Close the rinse agent dispenser door. We hope this information helps!
Was this helpful?
Thank you for voting!
Eric
October 11, 2023
Why is the dishwasher stopping mid cycle? its random on when when it stops when we restart the dishwasher and sometimes it will go for 10 minutes or 10 seconds before it stops without any error codes.
For model number HDF330PGR3WW
Hi Eric, thank you for contacting us. We believe your dishwasher is having this problem due to a faulty door latch, part number PS16659468, which may need to be replaced. We hope this helps, good luck with the repair!
The detergent dispenser clip is broken and the detergent lid won't stay shut- need a new clip?
For model number HDF330PGR3WW
Hello Megan, thank you for your inquiry. According to our research, the clip does not come separately. You may need to replace the detergent dispenser module, part number PS16542428. If you require assistance to place an order, please contact customer service!
Took off the kickplate, diconnected the wires and removed the whole door by lifting straight up, removing spring wires from hinges. Once door is disconnected from the machine, removed one hinge by removing bolt. Slid gasket into place, secured hinge back in place, then reconnected wires at bottom, replaced hinge spring wires and slid d
... Read moreoor back down onto hinges. Now that we know how to do it, could do it in 15 min to half hour.
this was ordered 4-9-21 and I have yet to receive it. Its difficult to explain the installation when you haven't received the main part. I paid for this but you have not shipped it. Very poor customer service.
