HDA2000V35WW Hotpoint Dishwasher Parts & Repair Help | PartSelect
Models > HDA2000V35WW

HDA2000V35WW Hotpoint Dishwasher - Overview

Sections of the HDA2000V35WW

[Viewing 3 of 3]

Manuals & Care Guides for HDA2000V35WW

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(125)
PartSelect #:PS11726733
Manufacturer #:WD35X21038
This lower rack wheel kit includes 8 wheels and 8 axles that allow the lower dishwasher rack to slide in and out smoothly. If your dishwasher door will not close, is noisy when ope...
$31.79
In Stock
(49)
PartSelect #:PS2370502
Manufacturer #:WD12X10304
The Rack Slide End Cap is a white one-inch plastic part which replaces the end cap for your dishwasher rack, preventing your rack from sliding too far. If you find the dish rack is...
$6.24
In Stock
(12)
PartSelect #:PS263963
Manufacturer #:WD8X227
This baffle fits the lower right hand corner of some dishwashers. It is black rubber and has a matching left hand lower corner baffle. It is recommended that you replace and instal...
$19.81
In Stock
(17)
PartSelect #:PS263964
Manufacturer #:WD8X228
The corner tub baffle may also be known as the door baffle and is a part used on your dishwasher. The left and right side baffle on your dishwasher should be installed and replaced...
$19.81
In Stock
(18)
PartSelect #:PS261346
Manufacturer #:WD28X265
The silverware basket, used for dishwashers, is in the bottom of the dishrack. The basket is used to hold eating utensils such as spoons, forks, and knives. If the basket is worn o...
$24.65
In Stock
(61)
PartSelect #:PS3486947
Manufacturer #:WD28X10284
This part includes the wheels.
$162.33
In Stock
(17)
PartSelect #:PS958908
Manufacturer #:WD08X10057
This one piece dishwasher door gasket provides a water tight seal to keep water from leaking out of your dishwasher.
$98.43
In Stock
(45)
PartSelect #:PS3654179
Manufacturer #:WD15X10014
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the de...
$32.27
In Stock
(5)
PartSelect #:PS298353
Manufacturer #:WR2X7054
This push on nut is for your dishwasher or refrigerator. As the name suggests, it pushes into place, rather than being screwed in. It is approximately half an inch in diameter and ...
$6.24
In Stock
(15)
PartSelect #:PS1481922
Manufacturer #:WD21X10261
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a p...
$23.04
In Stock
Questions and Answers for HDA2000V35WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lower rack wheel was melted

  • Customer: Mark from Huntingdon Valley, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 501 of 513 people found this instruction helpful
Unsnapped clip,and moved it 90 degrees. Slip wheel and clip off. Installed clip on new wheel. replaced new wheel. The wheel did not come with a new clip and was not suggested on the parts list. The existing clip was still OK but if it was not, I would have had to order a clip and wait. All in all, a good experience. read more

The rear wheels were missing on the lower rack.

  • Customer: Teresa from Phenix City, AL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 468 of 474 people found this instruction helpful
The wheels came with a clip on part that clipped to the rack and the wheel snapped into that clip. I am a woman and it was easy for me to do. Thanks to Parts Select for being an easy to use and navigate site, for quick shipment and for good directions with the parts. Sincerely, Teresa from Alabama. read more

Telescopic sprayer assembly in the Spray Arm Weld broke top element popped out

  • Customer: Larry from Fort Worth, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set, Wrench set
  • 99 of 118 people found this instruction helpful
First off on this model, if one of the telescopic spray arm weld assembly comes out it is NOT repairable you have to replace the whole part.
The assembly on my model number was simple you do NOT have to PRY anything out...(I broke the base spray arm trying to shove a screw driver into the Spray arm weld.(You could try this but chances are the plastic w... read more