GX270 (Type ESSA) Honda Engine - Overview

This is an original Honda replacement part that is manufactured for use with small engines. The purpose of the Air Cleaner Element is to filter dirt and debris from entering the engine and clogging it, therefore, comprimising the performance of the engine. Over time the air cleaner element will clog and needs to be replaced. This foam filter is an individually sold part.

This is sold as a set that contains five gaskets. They go next to the float chamber. These are genuine OEM sourced parts which are specially designed for use with Honda engines. When replacing these items a set of pliers might be required during the installation process. They are made out of rubber and will need to be replaced if they break.

It is a genuine manufacturer-approved replacement gasket which is designed for use with Honda engines that are commonly installed on lawn and garden equipment. The purpose fo this part is to create an air-tight seal between the carburetor and the stay assembly, please make sure to check appropriate diagrams of your model for correct locat...Read moreion and use of this item. Over time gaskets tend to deteriorate and crack eventually requiring replacement. It is made of durable composite material and it is sold individually.

This is an authentic replacement part sourced directly from the manufacturer. The stop switch wire is commonly found in Honda small engines. This part is made of metal wire with a flexible plastic casing, and is used to send signals from the engine stop switch to the engine. You may require a wrench and pliers when replacing this item. This product is available as an individual replacement part.

This is a genuine Honda part sourced directly from the manufacturer for use in engines. The air cleaner wire clip is made of metal. A set of pliers might be helpful during the installation of this item. It may become bent or broken and will need to be replaced. This part is sold individually.

This authentic manufacturer-sourced component is specially designed for Honda engines that are commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Make sure to refer to the appropriate diagrams for your specific model for the exact location a...Read morend the correct application of this clip. Keep in mind this high-quality product is made of durable metal and is sold as an individual item.

It is made of metal and is priced individually. The starter return spring connects to the recoil starter pulley. A set of pliers, a socket set, and a wrench set might be required during the replacement of this part. It will need to be replaced if it breaks. This authentic item is supplied by the original equipment manufacturer for use with Honda small engines.

This is an 8mm hex nut, which is a six-sided piece of hardware that connects two parts together in your lawn equipment by keeping screws, bolts, or studs in place. Hex nuts are commonly used in areas of your machine that undergo high stress like in the blade assembly, engine or wheels. If a hex nut is broken, it may be cracked or corroded...Read more, and you may find that you cannot tighten it enough to hold parts in your machine together. If it is not replaced, the parts of your machine may come apart. To remove a hex nut, use a wrench to turn it counterclockwise. Before purchasing this OEM replacement part, keep in mind that this part is sold individually and consult your instruction guide to find out how many nuts your machine needs and where they are located. It is best to replace all the hex nuts at once because they wear out at the same time.

This is an authentic Honda replacement part, sourced from the original manufacturer for use with small engines. The pulley is used to house the starter spring and to wind up the recoil starter rope. This pulley is sold as an individual replacement part, please note the rope and spring are available separately.