GM10514 Homelite Chainsaw - Overview

This guide bar nut is sourced from the original equipment manufacturer for use in chainsaws. It is made of metal, and has a diameter of 5/16 of an inch and a thread pitch of 18 threads per inch. The guide bar nut also has a flange on one end for added stability and security. The nut is responsible for holding the guide bar and chain in pl...Read moreace and ensures proper tension and alignment of the chain, for safe and efficient cutting. A faulty guide bar nut will result in the chain becoming loose or detached during operation, which poses a safety risk to the user. Additionally, a loose chain will result in reduced cutting ability, and damage to the guide bar. It is recommended to check your equipment manual for the correct number of guide bar nuts needed. Each nut is sold individually. Use a socket tool to loosen and remove the old nut. Clean the area around the guide bar and thread to ensure a good fit, and then insert the new nut and tighten it securely. Ensure that the chain is adequately tensioned before attempting to use the chain saw again.

This spark plug is an authentic Craftsman replacement part, and is compatible with chainsaws. The spark plug produces a spark that ignites the fuel in the engine. A socket wrench will be needed to install or replace the spark plug. This part is made of ceramic with metal and is sold individually.

This fuel filter is a genuine OEM part that is compatible with various lawn equipment models and is sold as an individual part. Fuel filters are used to remove dirt and debris from fuel entering the carburetor and engine and are made of metal with a fabric filter material, meaning this filter will eventually clog and need to be replaced. ...Read morePlease note that the fuel filter should be inspected regularly, not solely when it is clogged. The filter will be attached to the fuel line within the fuel tank and if your equipment is having starting, revving, or idling issues, the fuel filter may be the reason why. To replace it, simply use a hook to pull the old filter out from the fuel tank, use pliers to remove any clamps attached to the end of the fuel line, and pull the filter off. Attach the new filter to the fuel line, along with the clamp, and set the filter back into the tank.

This is an authentic OEM sourced replacement screw designed for use with chainsaws. It helps to secure the muffler assembly. This part is made out of metal and it is sold individually. You would need a wrench to tighten/loosen this screw.

This replacement adjustment screw is an authentic OEM supplied item that is specially designed for use with Homelite chainsaws. This screw is an important component of chain tensioning mechanism if the bar doesn't adjust when you turn the tension screw usually the tensioner pin or the adjustment screw is worn or damaged. This hardware is made of durable metal and it is sold individually.

This high quality replacement chain is specially designed for use with Homelite and Ryobi chainsaws. It is a genuine OEM sourced item, not an aftermarket imitation. This chain is only for use with 14" bars only. Over time chains tend to stretch and become dull requiring replacement. Please note, this metal chain is sold individually. To ...Read morereplace this chain you will need a wrench set and a screwdriver. • Remove the guide bar side panel • Release the chain tension • Remove the old chain • Loosen the tension screw • Thread the new chain onto the saw • Align the guide bar • Replace the side plate • Tighten the chain to the correct tension • Finish tightening the side plate nuts

This is a genuine part from original manufacturer. This sprocket drum and bearing is used in some Homelite chainsaws. A sprocket engages the chain while the bearing allows for reduced friction and stable motion. This is a relatively high wear part and usually needs replacement with regular use. Sold individually.

This replacement fuel cap is a genuine manufacturer*approved component which is specially produced for use with Homelite chainsaws. It is utilized to keep the fuel in the tank. Please note this high-quality durable plastic cap assembly is sold individually.

This is a Manufacturer Sourced replacement part for Lawn and Garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This Locking Nut has multiple uses based on your tool. You would need a Wrench to tighten or loosen this Hex Nut.

It is an authentic OEM supplied item that is designed for Homelite chainsaws. The adjusting nut is an important component of the chain tensioning mechanism. Over time it may wear out, get damaged or lost eventually requiring a replacement. Keep in mind this high-quality adjusting nut is made of durable metal and is sold individually. Chec...Read morek the diagrams for your model to ensure the correct repair procedure. A wrench set will be needed to replace this hardware.

This is a genuine manufacturer-sourced part which is specially designed for use with Homelite and Ryobi chainsaws. It is an identical replacement for a missing or damaged oil pump assembly that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this componen...Read moret. Keep in mind this high-quality assembly is made of durable metal and is sold individually.