This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it...
This capacitor (Refrigerator and Freezer Compressor Run Capacitor, Run Capacitor) provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor ...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed...
This water filter bypass cap, also known as a water filter bypass plug, is an authentic OEM part that replaces the regular water filter cartridge in refrigerators. It allows water to flow freely throu...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This long harness thermistor kit is what helps monitor and regulate the temperature inside your refrigerator. It can be located in either the freezer compartment near the evaporator coils or in the fr...
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake re...
This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.
$116.11
In Stock
Questions And Answers for GI5SVAXVL01
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
January 15, 2020
After a power outage the refrigerator will not operate. The light is on. When i push a button on the ice/water panel all the lights light up. When pushing the water dispenser, the unit beeps.
For model number GI5SVAXVL01
Hi Dennis, thank you for your question. Usually if you are having trouble with your dispenser control like that, it means that there may be an error in the board. That part has been discontinued and we have no known replacement listed in our system. We have no further information. You are welcome to contact the manufacturer of the part to see if they have recently released a new substitute. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joseph
September 27, 2023
Trying to replace damper control? Can't get cover off.
For model number GI5SVAXVL01
Hello Joseph, thank you for reaching out. We are providing you with the instructions that will help you in replacing the damper control assembly.
1- Depress the release button and remove the ice bin.
2- Remove the screws securing the side panel.
3- Depress the releasing the tabs and pull out the ice maker assembly.
4- Pull out the entire assembly.
5- Depress the tabs to release the blower assembly.
6- Disconnect the wire connector and pull out the damper assembly and replace it with the new one.
We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Abraham
March 9, 2020
Hello i have a Whirlpool gold refrigerator model number gi5svaxvl01 and i have a temperature regulator that's set at 8? but does not let me adjust the temperature to a higher setting. And the freezer temperature is set at 14? and does not let me adjust as well. Just want to know what part exactly do i need to fix this problem thank you
For model number GI5SVAXVL01
Hi Abraham,
Thank you for your question. According to your owner's manual, the temperature settings on your refrigerator are preset by the manufacturer. Here is a link to your owner's manual from our website that you may reference for more information on the temperatures in your refrigerator, https://partselectcom.azureedge.net/assets/manuals/2C2E061F4B842EE821DD4FC5032E4116FDCCD34E.pdf. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
Kenneth
February 10, 2022
Trying to find the location of the thermistor on my Whirlpool gi5svaxvl01 refrigerator to see if it is something i can repair or if there is too much to remove to get to it.
For model number GI5SVAXVL01
Hello Kenneth, thank you for your question. The thermistor is located under a small plastic cover attached to the surface of the back wall, side wall or ceiling. We hope this helps.
Was this helpful?
Thank you for voting!
Nicola
August 25, 2022
Hi, I need to replace the right hand door seal of the fridge, can't see it on the list?
For model number GI5SVAXVL01
Hey Nicola, thank you for your inquiry. We have researched your model number and found the door seal part number PS12728558. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck le
... Read moret's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate
... Read moremotions and a steady thought process on the problem helped disengage the darned old filter!
