GCV160N1 Honda Lawn Mower - Overview

This air cleaner element, also known as an air filter, is found in your lawn equipment. Typically housed in a rectangular container, it is located near the air intake area or carburetor of your machine. It keeps dust, dirt, and debris from entering the combustion chamber. If it is clogged, the restricted airflow will make the engine misfi...Read morere or run poorly, and potentially cause an engine failure. To replace the element, you will need to remove its housing cover by unscrewing or unclipping it. This OEM-certified filter is sold individually.

This is a genuine component which is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is supplied directly from the original equipment manufacturer. This bolt-stud helps to mount the cover-fan and the pull-starter. Please make sure to refer to the appropriate diagrams of your model for the ...Read morecorrect application of this hardware. Keep in mind this high-quality bolt-stud is made of durable metal and is sold individually. Replacing it is a simple task that should only require a wrench set to remove the old and secure the new.

Genuine Honda Engine replacement part, this item is sold individually. This part covers and secures the Air Cleaner Element to the Air Cleaner Case Assembly on the engine. It also has ports in it to allow air into the engine so it will perform properly.

This is a genuine Honda replacement part, it is sold individually. The Honda Insulator Gasket is installed between the Cylinder housing and the Carburetor Insulator ( Or Heat Dam). Its purpose is to create a seal so that air cannot enter the cylinder causing the engine to operate poorly. It also keeps other debris from entering the engine...Read more and damaging it. If this part becomes cracked or worn it should be replaced ASAP.

Genuine OEM replacement part, this item is sold individually. The purpose of this Gasket is to create a seal between the air cleaner body and the carburetor. If the air cleaner or carburetor are ever removed, it would be a good idea to replace this gasket.

Genuine Honda replacement part, this part is sold individually. The Insulator- Carburetor acts as a insulator to keep heat from transferring from the engine to the carburetor, which could cause damage to the carburetor.

This genuine item is supplied directly from the original equipment manufacturer for use with Honda engines commonly installed on a variety of lawn and garden equipment. It is the main cover for the cylinder assembly. The part helps to protect the internal components from dust and other contaminants. If your cover is damaged or is missing,...Read more this will provide an identical replacement for the original component that was installed on a new unit. This high-quality head cover is made of durable metal and is sold individually. Note, the hardware to secure it is sold separately. You will need a wrench to perform this repair.

This is a genuine OEM replacement part, it is sold individually. A carburetor basically consists of an open pipe through which the air passes into the inlet manifold of the engine. The pipe is in the form of a Venturi: it narrows in section and then widens again, causing the airflow to increase in speed in the narrowest part. Below the...Read more Venturi is a butterfly valve called the throttle valve ' a rotating disc that can be turned end-on to the airflow, so as to hardly restrict the flow at all, or can be rotated so that it (almost) completely blocks the flow of air. This valve controls the flow of air through the carburetor throat and thus the quantity of air/fuel mixture the system will deliver, thereby regulating engine power and speed. The throttle is connected, usually through a cable or a mechanical linkage of rods and joints. Fuel is introduced into the air stream through small holes at the narrowest part of the Venturi and at other places where pressure will be lowered when not running on full throttle.

This item is an authentic Honda replacement part and has been sourced from the original manufacturer to be used with small engines. The seal is used to prevent oil from leaking from between the crankcase and the crankshaft. The oil seal is available as an individual replacement part.

This Genuine OEM replacement part is designed for use with Lawn and Garden Engines. This is the Air Cleaner Base that connects to the Carburetor. It is made out of Plastic and it is Sold Individually. Please note the Cover and Filter are both Sold Separately. To replace this item you would need a Wrench. • Remove the Air Cleaner Cove...Read morer and the Element • Remove the Bolts that secure the Case • Separate the Carburetor Gasket • Secure the new Case with the Gasket using the Bolts • Place the Element and Secure it with the Cover