GCV160LAS3H Honda Engine - Overview

This air cleaner element, also known as an air filter, is found in your lawn equipment. Typically housed in a rectangular container, it is located near the air intake area or carburetor of your machine. It keeps dust, dirt, and debris from entering the combustion chamber. If it is clogged, the restricted airflow will make the engine misfi...Read morere or run poorly, and potentially cause an engine failure. To replace the element, you will need to remove its housing cover by unscrewing or unclipping it. This OEM-certified filter is sold individually.

This is a genuine component which is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is supplied directly from the original equipment manufacturer. This bolt-stud helps to mount the cover-fan and the pull-starter. Please make sure to refer to the appropriate diagrams of your model for the ...Read morecorrect application of this hardware. Keep in mind this high-quality bolt-stud is made of durable metal and is sold individually. Replacing it is a simple task that should only require a wrench set to remove the old and secure the new.

Genuine Honda Engine replacement part, this item is sold individually. This part covers and secures the Air Cleaner Element to the Air Cleaner Case Assembly on the engine. It also has ports in it to allow air into the engine so it will perform properly.

This is a genuine Honda replacement part, it is sold individually. The Honda Insulator Gasket is installed between the Cylinder housing and the Carburetor Insulator ( Or Heat Dam). Its purpose is to create a seal so that air cannot enter the cylinder causing the engine to operate poorly. It also keeps other debris from entering the engine...Read more and damaging it. If this part becomes cracked or worn it should be replaced ASAP.

Genuine OEM replacement part, this item is sold individually. The purpose of this Gasket is to create a seal between the air cleaner body and the carburetor. If the air cleaner or carburetor are ever removed, it would be a good idea to replace this gasket.

This genuine item is supplied directly from the original equipment manufacturer for use with Honda engines commonly installed on a variety of lawn and garden equipment. It is the main cover for the cylinder assembly. The part helps to protect the internal components from dust and other contaminants. If your cover is damaged or is missing,...Read more this will provide an identical replacement for the original component that was installed on a new unit. This high-quality head cover is made of durable metal and is sold individually. Note, the hardware to secure it is sold separately. You will need a wrench to perform this repair.

This governor spring regulates the engine speed in your lawn equipment. It works in conjunction with the governor mechanism to control the throttle and prevent the engine from over-revving or running at an excessively low speed. It is commonly found near the throttle assembly. Keep an eye out for signs of wear, damage, or stretching in th...Read moree spring. If it appears weak, worn, or if you notice engine surging or difficulty maintaining a steady speed, it may indicate a broken governor spring. Before replacing the spring, ensure the engine has cooled down. Remove the wire and boot from the spark plug and turn off the fuel valve. To replace the governor spring, unhook both ends of the old spring while taking note of the connection points. Install the new spring by hooking one end onto the governor lever and the other end onto the control bracket assembly. Once securely attached, turn the fuel valve back on and reattach the spark plug wire and boot. This replacement part is sourced directly from its original equipment manufacturer.

This item is an authentic Honda replacement part and has been sourced from the original manufacturer to be used with small engines. The seal is used to prevent oil from leaking from between the crankcase and the crankshaft. The oil seal is available as an individual replacement part.

This Genuine OEM replacement part is designed for use with Lawn and Garden Engines. This is the Air Cleaner Base that connects to the Carburetor. It is made out of Plastic and it is Sold Individually. Please note the Cover and Filter are both Sold Separately. To replace this item you would need a Wrench. • Remove the Air Cleaner Cove...Read morer and the Element • Remove the Bolts that secure the Case • Separate the Carburetor Gasket • Secure the new Case with the Gasket using the Bolts • Place the Element and Secure it with the Cover

This is an authentic manufacturer sourced replacement part designed for use with small Honda engines. This carburetor gasket provides an air tight seal between the carburetor and the bowl. Over time gaskets tend to deteriorate and would need to be replaced. This set includes two (2) rubber material gaskets. You would need a wrench set to complete this repair.

This replacement part is sourced from the original equipment manufacturer. It is specially designed for use with Honda engines that are commonly installed on a variety of lawn and garden equipment. Unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. Please make sure to refer to the appropriate...Read more diagrams of your model for the correct location and application of this part. This high-quality spring is made of durable metal and is sold individually.