GCV160A0 Honda Engine - Overview

This air cleaner element, also known as an air filter, is found in your lawn equipment. Typically housed in a rectangular container, it is located near the air intake area or carburetor of your machine. It keeps dust, dirt, and debris from entering the combustion chamber. If it is clogged, the restricted airflow will make the engine misfi...Read morere or run poorly, and potentially cause an engine failure. To replace the element, you will need to remove its housing cover by unscrewing or unclipping it. This OEM-certified filter is sold individually.

This is a genuine component which is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is supplied directly from the original equipment manufacturer. This bolt-stud helps to mount the cover-fan and the pull-starter. Please make sure to refer to the appropriate diagrams of your model for the ...Read morecorrect application of this hardware. Keep in mind this high-quality bolt-stud is made of durable metal and is sold individually. Replacing it is a simple task that should only require a wrench set to remove the old and secure the new.

Genuine Honda Engine replacement part, this item is sold individually. This part covers and secures the Air Cleaner Element to the Air Cleaner Case Assembly on the engine. It also has ports in it to allow air into the engine so it will perform properly.

This genuine OEM air cleaner element is also known as an air filter, and it is found in the air filter housing or air intake system of your lawn equipment. It removes dust and debris from the air entering the engine to safeguard it from damage. It is a paper element with an orange frame. If the cleaner element appears damaged or excessive...Read morely clogged with debris, it needs replacement. For this simple replacement, no tools are needed. Press the retaining tabs down to release the air filter housing cover. With the cover removed, pull the old cleaner element off by hand. Install the new air cleaner by placing it in the housing and aligning the lower cover tabs with the housing and then snap the upper tabs into place. Install the new cleaner element by positioning it in the housing then align the lower cover tabs with the housing and snap the upper tabs into place. It is recommended that you check your air cleaner element every three months and replace it if necessary. Since this replacement part is sold individually, it is a good idea to keep extras on hand for regular equipment maintenance.

This is a genuine Honda replacement part, it is sold individually. The Honda Insulator Gasket is installed between the Cylinder housing and the Carburetor Insulator ( Or Heat Dam). Its purpose is to create a seal so that air cannot enter the cylinder causing the engine to operate poorly. It also keeps other debris from entering the engine...Read more and damaging it. If this part becomes cracked or worn it should be replaced ASAP.

Genuine OEM replacement part, this item is sold individually. The purpose of this Gasket is to create a seal between the air cleaner body and the carburetor. If the air cleaner or carburetor are ever removed, it would be a good idea to replace this gasket.

This is a genuine OEM sourced replacement part used on small lawn and garden engines. This is the starter assembly that is used to crank start the unit. It includes a plastic shroud/housing, starter pulley, starter spring, grip and the pull rope. Please note the hardware/screws used to attach this assembly are sold separately.

Genuine Honda replacement part, this part is sold individually. The Insulator- Carburetor acts as a insulator to keep heat from transferring from the engine to the carburetor, which could cause damage to the carburetor.

This is a genuine Honda replacement spark plug. It is sourced directly from original equipment manufacturer and it is sold individually. It is designed to ignite the air fuel mixture by the spark. If spark plugs are not checked with regular services, cleaned or changed when necessary, they can cause problems to occur with the engine. Replacing it you should only need a spark plug socket.

This genuine item is supplied directly from the original equipment manufacturer for use with Honda engines commonly installed on a variety of lawn and garden equipment. It is the main cover for the cylinder assembly. The part helps to protect the internal components from dust and other contaminants. If your cover is damaged or is missing,...Read more this will provide an identical replacement for the original component that was installed on a new unit. This high-quality head cover is made of durable metal and is sold individually. Note, the hardware to secure it is sold separately. You will need a wrench to perform this repair.