FUF17DUARWW General Electric Freezer - Overview

Diagrams for FUF17DUARWW

See every part. Know exactly what you need.

Parts for the FUF17DUARWW

Key

Part #WR01X26468

This key is for freezers. If your key will not lock or unlock the freezer door, check it to see if it has been bent or damaged. If it has been damaged, you should look to replace it to avoid damaging the lock. The key should engage the locking mechanism with ease. These keys are sold separately, and should be stored somewhere safe and not next to the unit.

$171.63

UPRIGHT FREEZER - GASKET WHITE

★★★★★

(2)

Part #WR14X28402

Defrost Thermostat

Part #WR50X10031

The thermostat senses that the heat near the cooling coils has reached the desired temperature.

SWITCH LIGHT/LAMP PLUN

Part #WR23X10632

TRIM-HANDLE WHITE

Part #WR38X10392

$57.38

LOCK Assembly

Part #WR05X10038

DEFROST HEATER

Part #WR51X10060

HANDLE-DOOR WHITE

Part #WR12X10843

$62.39

FAN BLADE

Part #WR60X139

$41.07

Freezer Screw Hex Washer Head 1

Part #WR01X10823

GASKET SECONDARY

Part #WR14X10004

MOTOR FAN 115 V

Part #WR60X10235

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Gasket not sealing

2 of 2 people found this instruction helpful.

Hazel from FRIENDSWOOD, TX
Difficult
30 - 60 mins
Screw drivers

Per the UTube video ...
Once the gasket was on, the door would not seal.
Gasket was removed and placed in dryer again to "soften" but to no avail on the second try.
When we received the package, the box was ripped open and only the wadded up gasket in the box. Don't know if someone just shoved it in or what. I think thi ... Read more

Read less

Was this helpful?

The freezer was missing the key

1 of 2 people found this instruction helpful.

james from las cruces, NM
Easy
Less than 15 mins

I ordered a pair of new keys from Parts Select and found the website extremely easy to use. I found the key I needed in less than 10 minutes and ordered the item. The key woked perfectly. Delivery was prompt and the cost was resonable. I have bookmarked the site for future use. thank you. James

Was this helpful?

Someone Pressed Too Hard On Handle

1 of 3 people found this instruction helpful.

Doug from Montgomery, TX
Easy
Less than 15 mins
Screw drivers

I removed the plastic caps over the top and bottom retainer screws; removed the screws; removed the broken plastic nipples; placed the new handle in the proper position; re-inserted retainer screws; snapped plastic caps back in place and was finished with the repair.

Was this helpful?