This key is for freezers. If your key will not lock or unlock the freezer door, check it to see if it has been bent or damaged. If it has been damaged, you should look to replace it to avoid damaging the lock. The key should engage the locking mechanism with ease. These keys are sold separately, and should be stored somewhere safe and not next to the unit.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The freezer door was catching when opened and frost was building inside telling me that the seal wasn't good.
17 of 21 peoplefound this instruction helpful.
Paulette from Great Falls, MT
Really Easy
Less than 15 mins
Screw drivers
I called the local GE dealer for repair. The repair person arrived and told me that he could not get the part. The freezer was too old. Then he charged me $60 for coming out. I went online and did a search for parts with the model number above. I found Partselect.com and the diagrams showed which part I needed. It was in stock and I
... Read moreordered it. My husband and I removed the door to the freezer, pushed the part into the hole at the bottom of the door and put the door back on its hinges. It works perfectly. Thank you.
Read less
Was this helpful?
Thank you for voting!
freezer kept icing up on the coils would only get down to 20 degrees.
4 of 8 peoplefound this instruction helpful.
Jerry from Elverta, CA
Really Easy
Less than 15 mins
Screw drivers
unplug the freezer. remove the 2 screws holding the timer, unplug the electrical fitting w/4 prongs. reverse the steps and you are done.
Was this helpful?
Thank you for voting!
Gasket not sealing
2 of 2 peoplefound this instruction helpful.
Hazel from FRIENDSWOOD, TX
Difficult
30 - 60 mins
Screw drivers
Per the UTube video ... Once the gasket was on, the door would not seal. Gasket was removed and placed in dryer again to "soften" but to no avail on the second try. When we received the package, the box was ripped open and only the wadded up gasket in the box. Don't know if someone just shoved it in or what. I think thi
... Read mores is what caused the issue with it not sealing. Also no instructions except on your website. We ended up putting on the original gasket and sealed the cut on the gasket with tape. Freezer seals well and no leaks or issues. I still have the gas but no clue what to do with it if we can't get it to work. Is there a refund available?