FTV630 (Type 0) DeVilbiss Compressor - Overview
Sections of the FTV630
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
ASSY FASTENER
PartSelect #: PS12512819
Manufacturer #: ACG-408
This assembly fastener is supplied directly from the original equipment manufacturer. The screws are constructed of metal, and are compatible with many compressor machines. This part is often used to ...
$6.40
In Stock
ELEMENT FILTER INTAK
PartSelect #: PS18991074
Manufacturer #: ACG-12
This filter is an original part from Craftsman for air compressors. This part ensures that the air entering the engine is free of debris and dust. It is recommended you wear gloves and release the ai...
No Longer Available
NUT .563-18 UNF HEX
PartSelect #: PS12533938
Manufacturer #: SSP-7821-1
This is an authentic replacement part that has been OEM sourced to be used with Porter Cable, DeVilbiss, and Black and Decker air compressors. The metal nut is commonly used to connect the outlet tube...
$12.59
In Stock
ASSY NUT SLEEVE 3/8
PartSelect #: PS12528233
Manufacturer #: SSP-7813
This is a genuine replacement part manufactured for use with air compressors from DeWalt. This part creates an airtight seal between the elbow and the tube. You may need a wrench to replace this part...
$6.40
Special Order
VALVE SAFETY 150 .12
PartSelect #: PS12466664
Manufacturer #: 97503734
This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions and does not turn the motor off when the amount of pressure ...
$10.32
In Stock
CUP SADDLE MOUNT
PartSelect #: PS12497303
Manufacturer #: ACG-18
This saddle mount cup is an OEM direct from Craftsman for air compressors. This part holds the screw in place. You will need a wrench to remove the bolts that go through it. It is recommended that yo...
$6.40
In Stock
BOLT .375-16X2.25 UN
PartSelect #: PS12513336
Manufacturer #: CAC-60
Used to secure the wheels on a compressor or generator, this Shoulder Bolt is roughly 3.75 inches long and is sourced directly from the original equipment manufacturer. It is made of dark grey metal,...
No Longer Available
ORING 306/296ID 073/
PartSelect #: PS12533934
Manufacturer #: SSG-3105
This is an authentic manufacturer-sourced replacement o-ring which is specially designed for use with air compressors. It helps to provide an air tight seal for the nut which secures the outlet tube, ...
$6.40
In Stock
REGULATOR 4PORT P1P2
PartSelect #: PS12515680
Manufacturer #: AC-0007
This is a genuine OEM part that is intended to be used with air compressors from Porter Cable, DeVilbiss, and Black & Decker. The regulator is used to adjust the level of pressure in the tank. This it...
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Can't find this special screw used on many housings etc
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more AGC-408 by craftsman.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more AGC-408 by craftsman.
Read less
Parts Used:
-
Tim from Tucson, AZ
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!