FT55 (2000) Cub Cadet Tiller - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This depth bar is a genuine OEM replacement designed for front-tine garden tillers. It mounts at the rear of the tiller and regulates how deeply the tines penetrate the soil, giving the operator consistent control over tilling depth for different ground conditions. Finished in durable powder-black steel for long service life, it’s an idea...Read morel replacement when the original depth stake is bent, worn, or broken, helping restore proper tiller performance and uniform soil cultivation.

This is a MTD and Yard Machines replacement part directly sourced from the manufacturer for use in lawn mowers. The left hand inner tine goes next to the left hand outer tine. It might require a set of pliers and a hammer to replace this item. It will need to be replaced if it breaks or cracks. This part is made of metal and is available individually.

This right-hand inner tine assembly restores proper soil-cutting performance on front-tine rototillers by replacing a bent, worn, or broken tine. Its durable steel construction is shaped to aggressively break up compacted soil, weeds, and turf, helping achieve effective tilling and cleaner seedbed preparation. Suitable for routine mainten...Read moreance or repair, this tine helps maintain balanced tiller operation and consistent cultivation results when one side becomes damaged or excessively worn.

This is an authentic component which is supplied from the original equipment manufacturer for use with garden tillers. This is the main belt that drives the unit, when installing a new belt, make sure to clean pulleys to ensure top performance and longevity of your new belt. Inspect it periodically and replace when worn or stretched. This part is made of high-quality rubber and is sold individually.

This is an authentic replacement part generally used on a variety of lawn and garden equipment. It is sourced from original equipment manufacturer and it is sold individually. This nut is a standard hardware which has multiple uses based on equipment. Please refer to appropriate diagrams for correct use/application of it. Please note you would need a wrench when working with this left hand threaded nut.

This is an original replacement part sourced directly from the manufacturer. The flat idler is commonly found in snowblowers and tillers from Ryobi, MTD, and Yard Machines. This part is made of metal, and is used to adjust the tension on the V-belt. You will require a wrench when replacing this item. The flat idler is sold as an individual replacement part.