FT24 (2007) Cub Cadet Tiller - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This metal washer is compatible with several different makes and types of small engine equipment, and is a genuine OEM part. Used to evenly distribute pressure on the oil drain from the drain bolt, this washer has a 19mm/.75-inch outer-diameter and 12mm/.5-inch inner-diameter and is sold individually without the drain bolt, which is sold ...Read moreseparately. It is, however, recommended that if you replace this washer, you replace the drain bolt as well.

This is an authentic manufacturer sourced replacement part designed for use with small Honda engines. This carburetor gasket provides an air tight seal between the carburetor and the bowl. Over time gaskets tend to deteriorate and would need to be replaced. This set includes two (2) rubber material gaskets. You would need a wrench set to complete this repair.

This is an authentic Honda replacement part, sourced from the original manufacturer for use with small engines. The special hex head bolt is commonly used to secure the ignition module assembly. This flanged bolt is available as an individual replacement part, please see illustrated part list for associative parts.

This depth bar is a genuine OEM replacement designed for front-tine garden tillers. It mounts at the rear of the tiller and regulates how deeply the tines penetrate the soil, giving the operator consistent control over tilling depth for different ground conditions. Finished in durable powder-black steel for long service life, it’s an idea...Read morel replacement when the original depth stake is bent, worn, or broken, helping restore proper tiller performance and uniform soil cultivation.

This is a MTD and Yard Machines replacement part directly sourced from the manufacturer for use in lawn mowers. The left hand inner tine goes next to the left hand outer tine. It might require a set of pliers and a hammer to replace this item. It will need to be replaced if it breaks or cracks. This part is made of metal and is available individually.

This right-hand inner tine assembly restores proper soil-cutting performance on front-tine rototillers by replacing a bent, worn, or broken tine. Its durable steel construction is shaped to aggressively break up compacted soil, weeds, and turf, helping achieve effective tilling and cleaner seedbed preparation. Suitable for routine mainten...Read moreance or repair, this tine helps maintain balanced tiller operation and consistent cultivation results when one side becomes damaged or excessively worn.

This is an authentic component which is supplied from the original equipment manufacturer for use with garden tillers. This is the main belt that drives the unit, when installing a new belt, make sure to clean pulleys to ensure top performance and longevity of your new belt. Inspect it periodically and replace when worn or stretched. This part is made of high-quality rubber and is sold individually.

This is a genuine manufacturer-approved component which is specially made for use with Honda engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a faulty nut that helps to secure the tappet adjusting screw. Please make sure to refer to the appropriate diagrams of your model for the corr...Read moreect location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an authentic manufacturer-sourced part that is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is an identical replacement for a faulty or a damaged tappet adjusting screw that was installed on a new unit. The purpose of this item is to secure a valve rocker arm, please make sure t...Read moreo refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.