This small, Phillips-head screw works with your refrigerator/freezer. It screws in to the freezer door and connects to the door handle. This part is made of stainless steel and is sold individually. T...
This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes ...
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
The PurePour water filter is compatible with Frigidaire, Frigidaire Gallery and Professional side-by-side and French Door refrigerators with PurePour ice and water filtration. This genuine Frigidaire ...
This freezer basket hanger, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer compartment of your refridgerator. This hanger is for the left side. Pull out the front...
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karen
March 31, 2022
How do i remove the water filter?
For model number FRSS2623AB0
Hi Karen,
Thank you for your question. The water filter should pull right out of the housing. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
February 15, 2023
Very little ice is produced. Enough for 1 or 2 glasses a day. Is there a way to increase the amount of ice produced?
For model number FRSS2623AB0
Hi Linda, thank you for contacting us. According to our research, if water is dispensing slowly or not at all, or your water filter is older than 6 months, you might need to replace it with part number PS16218782. Check your water inlet valve, part number PS16227301, for blockages. Also, make sure the water supply line is not kinked, this sometimes can happen if the refrigerator is pushed too far against the wall. Heavy traffic, and opening or closing the refrigerator doors excessively can also slow down ice production. If it does not help we suggest replacing the ice maker assembly, part number PS16745549. We hope this helps.
Hello i need a door bin can you help me find it? Thank you
For model number FRSS2623AB0
Hi Mark, thank you for contacting us. Your refrigerator comes with the following bins:
Freezer door: Upper bin, part number PS16543751, lower bin, part number PS16543752.
Fresh food door: Door shelf bin, part number PS16543749, door shelf bin, part number PS16543750.
If you require assistance to place an order, please contact customer service!
Need help I need a replacement of a air filter and water filter ...
For model number PS16218782
Hi Debbie, thank you for reaching out. The parts you are looking for are the water filter, part number PS16218782, and the air filter, part number PS12586284. We hope this helps!
Red warning light on front of door that says change water filter, will not go off. Have put in new filter, ran water dispenser for 4 mins. held button inside door as well as button on front of door. Light still on.
For model number FRSS2623AB0
Hello Virginia, thank you for contacting us. Press and hold the Water Filter reset button on the Ice & Water Dispenser control panel for 3 seconds. When the display changes from red to green, the status has been reset. If that does not help, try resetting the unit by unplugging or turning off the beaker for three minutes, then turning it back on. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
old gasket is very easy to pull off. putting the new gasket will only took me few minutes to put on, just make sure you press it firmly .everything works out right .
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used
... Read more my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
