FP209598 (2007) Campbell Hausfeld Compressor - Overview

This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to d...Read morerain your tank after each use—particularly if you tend to leave air in the tank for extended periods. Regular draining helps extend the life of your compressor and maintain its performance. Be sure to open the valve regularly to prevent water buildup and potential tank corrosion.

This genuine replacement on/off switch is specially designed for Campbell Hausfeld air compressors. It is supplied directly from original manufacturer and it is sold individually. This switch is used to turn the compressor on and off. Switches have moving mechanical parts that will eventually fail. At this point the switch should be repla...Read moreced. This is a simple repair that will only require a screwdriver. • Remove screws from the housing • Lift up the housing • Disconnect wires from the switch • Remove old switch and secure new one in place • Reassemble and test the compressor

This is a genuine OEM sourced part used on Campbell Hausfeld air compressors. The 5 piece accessory kit includes an inflation needle, two nozzles, one plug and a tire air chuck. The compressor kit hardware is composed of high-quality metal and durable plastic. It is recommended to refer to the manual and diagrams for repair instructions. ...Read moreThe 5 piece accessory kit is sold individually. An adjustable wrench is often required for the installation.

This part is an OEM sourced directly from the manufacturer for use in compressors made by Campbell Hausfeld. The manifold assembly attaches to the tank and is made of metal. It may require an adjustable wrench during installation and will need to be replaced if it becomes broken. This part is available as an individual replacement.

This is a genuine OEM supplied replacement part which is designed for Campbell Hausfeld air compressors. The pressure switch is designed to activate the compressor motor at a pre-set pressure and to deactivate the motor once that pressure has been reached. Common symptoms of a faulty pressure switch include a motor that continues to run (...Read moreregardless of pressure) until the safety valve opens or a compressor that simply will not turn on at all. Refer to the owner's manual and the appropriate diagrams for your model to ensure the proper repair procedure. Note, this high-quality pressure switch is sold as an individual item.

This is an authentic manufacturer-sourced part which is specially designed for use with Campbell Hausfeld air compressors. Check valve lets pressurized air flow into the tank and prevents it from flowing back into the pump. It is an identical replacement for a missing or a faulty component that was installed on a new unit, please make sur...Read moree to check the diagrams of your model for the accurate location and application of this valve. When replacing this part make sure to unplug the air compressor and release the air from the tank. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an original replacement part manufactured for use with air compressors. This air hose is a complete assembly and is coiled for easy storage. The hose includes brass fittings, but depending on the tool or application an adapter may be needed. The hose is sold individually.

This is an OEM part sourced directly from the manufacturer. The safety valve is designed for use in Campbell Hausfeld compressors. This part is made of metal, and is connected to the tank to release excess air when the pressure becomes too high. You may require a wrench when replacing this part. This item is sold individually.