FP204900 (2004) Campbell Hausfeld Compressor - Overview

This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to d...Read morerain your tank after each use—particularly if you tend to leave air in the tank for extended periods. Regular draining helps extend the life of your compressor and maintain its performance. Be sure to open the valve regularly to prevent water buildup and potential tank corrosion.

This genuine replacement on/off switch is specially designed for Campbell Hausfeld air compressors. It is supplied directly from original manufacturer and it is sold individually. This switch is used to turn the compressor on and off. Switches have moving mechanical parts that will eventually fail. At this point the switch should be repla...Read moreced. This is a simple repair that will only require a screwdriver. • Remove screws from the housing • Lift up the housing • Disconnect wires from the switch • Remove old switch and secure new one in place • Reassemble and test the compressor

This is a genuine OEM sourced part used on Campbell Hausfeld air compressors. The 5 piece accessory kit includes an inflation needle, two nozzles, one plug and a tire air chuck. The compressor kit hardware is composed of high-quality metal and durable plastic. It is recommended to refer to the manual and diagrams for repair instructions. ...Read moreThe 5 piece accessory kit is sold individually. An adjustable wrench is often required for the installation.

This genuine manufacturer-sourced part is specially designed for use with Campbell Hausfeld compressors. The purpose of a regulator gauge is to display the pressure readings. There are several reasons it could be leaking air, unfortunately, over time components will wear out and may begin to fail eventually requiring a replacement. Please...Read more make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality regulator gauge is sold individually.

It is a genuine OEM sourced replacement part which is specially designed for use with Campbell Hausfeld oilless compressors. This foot is attached to the base and it helps to reduce vibrations from a working unit, over time the material may wear out or parts simply may get lost eventually requiring a replacement. Keep in mind this item includes four rubber feet.

The manifold assembly attaches to the gauge, the safety valve, and the regulator gauge. This is available as an individual replacement part. This is a genuine Campbell Hausfeld part sourced directly from the manufacturer for use in oilless compressors. A screwdriver and a socket set may be needed to replace this part which is made of metal.

This is a genuine OEM supplied replacement part which is designed for Campbell Hausfeld air compressors. The pressure switch is designed to activate the compressor motor at a pre-set pressure and to deactivate the motor once that pressure has been reached. Common symptoms of a faulty pressure switch include a motor that continues to run (...Read moreregardless of pressure) until the safety valve opens or a compressor that simply will not turn on at all. Refer to the owner's manual and the appropriate diagrams for your model to ensure the proper repair procedure. Note, this high-quality pressure switch is sold as an individual item.

This is an authentic manufacturer-sourced part which is specially designed for use with Campbell Hausfeld air compressors. Check valve lets pressurized air flow into the tank and prevents it from flowing back into the pump. It is an identical replacement for a missing or a faulty component that was installed on a new unit, please make sur...Read moree to check the diagrams of your model for the accurate location and application of this valve. When replacing this part make sure to unplug the air compressor and release the air from the tank. Keep in mind this high-quality part is made of durable metal and is sold individually.