EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FGHS2631PF0 Frigidaire Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bottom Door Bin – Part Number: 240323002
$57.15
In Stock
Bottom Door Bin
★★★★★
★★★★★
(135)
Part #240323002
The Bottom Door Bin is also commonly known as a "cantilever shelf" is a clear plastic drawer which holds items in the bottom area of your fridge's interior, on the door. This OEM part is very easy to install and will not require any tools, you will just need to snap the mounting tabs into place for removal and installation. If damaged you will notice visible damage or have problems holding items in the fridge. If damaged, it should be replaced. Check your model number and user manual to see if this is the right part for you. This is important, as many fridges use multiple door bins, many of which vary slightly. This part is sold individually.
Crisper Cover Support - Front – Part Number: 241993101
$13.12
In Stock
Crisper Cover Support - Front
★★★★★
★★★★★
(85)
Part #241993101
This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the front and the rear support, as designed by the manufacturer, and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. If you cannot get the pin out you can use a flat-blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.
Crisper Support - Rear – Part Number: 241993001
$17.18
In Stock
Crisper Support - Rear
★★★★★
★★★★★
(21)
Part #241993001
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to the inside cabinet wall. If there is visible damager or your crisper stops fitting properly, it may be time to replace the part. Check your user manual and model number to ensure this part is what you need. Replacing the rear crisper support in your refrigerator is an easy job. This part is made from plastic and mounts on the inside of the wall. To complete this repair you will need a small putty knife, a punch or a short flat blade screwdriver, and a small hammer. You may need to replace your rear crisper support if you find that the door will not open or close. In order to complete this repair, you will need to remove all the shelves above the crisper in order to have ample room to work. It is also good to have duct tape on hand, which can be used to protect the liner around the support. This part is sold individually. Please note that the rear and front crisper support are different parts; this is the one you are looking for if it is your rear support that needs replacing.
Door Shelf – Part Number: 240351601
$52.75
In Stock
Door Shelf
★★★★★
★★★★★
(92)
Part #240351601
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide. It can be used in the freezer or refrigerator and is very easy to repair. All you need to do is snap the new door bin into place, which requires no tools. This part is sold individually and not as part of a set, even though your refrigerator may take more than one of this part.
Refrigerator Water Inlet Valve – Part Number: 242252702
$68.15
In Stock
Refrigerator Water Inlet Valve
★★★★★
★★★★★
(124)
Part #242252702
The function of the Refrigerator Water Inlet Valve (Triple Solenoid Water-Valve, Water Valve, Water Inlet Valve, Refrigerator Water Inlet Valve Assembly) is to release water from the supply line when activated, and send it through to your water dispenser or ice maker in your refrigerator. The water inlet valve is located at the back of the refrigerator, and connects to the water supply. The valve can break from material fatigue or normal use. If your water inlet valve is malfunctioning, you could be getting a lack of water to the inside of your refrigerator. Your ice maker may not produce cubes or your water dispenser may not work. The water inlet valve must be replaced if the solenoids no longer have continuity or the valve has internal blockage. This valve measures approximately 7 inches long and 4.5 inches wide, and is constructed of plastic and metal. It comes in blue, and includes the valve and mounting bracket.
Door Bin - Clear – Part Number: 240356402
$78.05
In Stock
Door Bin - Clear
★★★★★
★★★★★
(74)
Part #240356402
This genuine refrigerator door bin is perfect for storing items on your fridge door. Made from clear plastic, it’s easy to install with no tools required—just snap it into place. Ideal for replacing cracked or stained bins, it’s sold individually.
Refrigerator Water Filter – Part Number: ULTRAWF
$79.11
In Stock
Refrigerator Water Filter
★★★★★
★★★★★
(76)
Part #ULTRAWF
This genuine PureSource Ultra water filter will fit most Frigidaire french door and side by side refrigerators. You will find this filter located in the back, top right of the appliance. It is white in color and the filter has a polypropylene plastic housing and extruded carbon block filter media. Certified by NSF/ANSI to reduce contaminants that may be in your household water supply by 99.8 percent. The operating temperature for this filter is 33-100 degrees Fahrenheit, the flow rate is 0.5 GPM, the working pressure is 30-100 PSI, and it has a micron rating of 1. This filter should be replaced every six months or when the indicator lights up red. Installation is quick and easy. Push on the end face of the older filter to allow it to release. Remove and discard the old filter. Slide the new filter into the housing and press it down until it locks into place. Be sure to run water through the dispenser for about three minutes to prime the filter before use. Discard this water or use it to water plants. Do not forget to reset the indicator by pressing it down for 3-10 seconds. Review the use and care guide before you install for more detailed instructions.
Refrigerator Shelf Frame (Glass not included) – Part Number: 241969501
$80.45
On Order
Refrigerator Shelf Frame (Glass not included)
★★★★★
★★★★★
(68)
Part #241969501
This refrigerator shelf frame is an OEM part that serves to support the glass above your meat pan or chill drawer in your refrigerator. White to off-white in color, this part does NOT include the glass pane that it supports, you will need to order this part separately. This part is sold individually and measures close to 18.5x17.5 inches in length and width. Most of our customers rated this repair as being very easy to carry out, taking less than 15 minutes and requiring no tools.
Air Filter – Part Number: EAFCBF
$37.91
In Stock
Air Filter
★★★★★
★★★★★
(25)
Part #EAFCBF
This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important to change the filter every 6 months to ensure that food is kept fresh, and the humidity is controlled. This part measures about 7 inches wide and 5 inches deep. Follow installation instructions provided by the manufacturer when installing this part to ensure accurate results and further guidance. Remember to unplug the refrigerator from the power source before starting this project. The air filter may be located in different places depending on your appliance, but is usually on the inner right or left side. See your manual for exact location. Our customers rated this as a very easy repair that takes only a few minutes; just locate and remove the old air filter and insert the new one to complete the repair, which requires no tools.
Refrigerator Crisper Drawer – Part Number: 240351061
$74.82
In Stock
Refrigerator Crisper Drawer
★★★★★
★★★★★
(29)
Part #240351061
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity control slide, and this component is now sold separately. The crisper drawer is designed to store produce at a humidity level that ensures your food is kept fresh for as long as possible. It is commonly replaced because it is cracked, warped, or stained. For this simple tool-free repair, start by opening your refrigerator door and sliding out the old crisper drawer. Take your new crisper drawer and align the thin ridge on the top of the drawer with the track located inside the refrigerator. Slide the new part into place and your repair is complete.
Defrost Thermostat Kit – Part Number: 5303918214
$35.95
In Stock
Defrost Thermostat Kit
★★★★★
★★★★★
(27)
Part #5303918214
If you find that there is excessive frost in your freezer, or the freezer will not defrost, you may need to replace the defrost thermostat. The defrost thermostat kit comes with the clip, leads, and one heat shrink. To access the defrost thermostat for this repair, you will need to remove your freezer shelves, as well as the back panel of your freezer. To complete this repair, you will need a 1/4-inch nut driver, a set of wire strippers and crimpers, and a heat gun or blow dryer. Before you begin this repair, be sure to disconnect the power source from the appliance.
Refrigerator Ice Maker Assembly – Part Number: 241798231
$87.51
In Stock
Refrigerator Ice Maker Assembly
★★★★★
★★★★★
(99)
Part #241798231
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Manuals & Care Guides for FGHS2631PF0

Click to download

Questions And Answers for FGHS2631PF0

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sam - For model number FGHS2631PF0
September 18, 2022
My damper door tests good when I go through the diagnostic mode but it doesn’t operate at all when the refrigerator reaches its set temperature where do I need to look to find the solution to this problem?
Chris Boyle Profile
Hi Sam, Thank you for your question. If the damper does not operate when it reaches the set temperature, it will need to be replaced. The part number listed under your model number for the damper assembly is PS2331826. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
$119.61
In Stock
Damper Control Assembly with Seal
Was this helpful?
Thank you for voting!
William - For model number FGHS2631PF0
May 22, 2025
Where do I find a water filter and how do I install it?
Chris Boyle Profile
Hello William, thank you for reaching out. The compatible water filter for your model is part number PS2364646. To replace your water filter: 1. Turn Off the ice maker. 2. Remove the filter by pushing on the end/ face of the filter. 3. Slide the old water filter cartridge straight out of the housing and discard it. 4. Using the alignment guide, slide the new filter gently into the filter housing until it stops against the snap-in connector at the back of the housing. 5. Push firmly until the cartridge snaps into place (you should hear a click as the cartridge engages the snap-in connector). 6. Press a drinking glass against the water dispenser while checking for any leaks at the filter housing. Any spurts and sputters that occur as the system purges air out of the dispenser system are normal. We hope this helps!
Was this helpful?
Thank you for voting!
Cliff - For model number FGHS2631PF0
June 6, 2026
Freezer is to cold refrigerator is to warm. Would this be the damper motor
Chris Boyle Profile
Hi Cliff, thank you for reaching out. Based on our understanding, the issue seems to be with the damper control assembly, part number PS2331826. It is designed to regulate the flow of cold air between the freezer and fresh food compartments. You may need to replace it to fix the issue. We hope this solves your problem!
$119.61
In Stock
Damper Control Assembly with Seal
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the FGHS2631PF0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
water leaking out of refrigerator
608 of 723 people found this instruction helpful.
  • Jose from Alexandria, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Wrench (Adjustable)
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Was this helpful?
Thank you for voting!
Tab on bottom door bin broke off
541 of 573 people found this instruction helpful.
  • Mark from Redlands, CA
  • Really Easy
  • Less than 15 mins
Replaced bottom door bin being careful not to put stress on the tabs to fit into molded area in door.
Was this helpful?
Thank you for voting!
freezer shelf broke
506 of 533 people found this instruction helpful.
  • MONICA from LANCASTER, CA
  • Really Easy
  • Less than 15 mins
Easy slide it back in place
Was this helpful?
Thank you for voting!