FGET3065KFA Frigidaire Wall Oven Parts & Repair Help | PartSelect
Models > FGET3065KFA

FGET3065KFA Frigidaire Wall Oven - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(11)
PartSelect #:PS820208
Manufacturer #:316217002
The oven temperature sensor for your range may also be called a probe. The quick connect on this part may differ than your original piece. If the temperature sensor does not fit yo...
$39.98
In Stock
(10)
PartSelect #:PS12751166
Manufacturer #:316538904
Clear, 120 Volt, 40 Watt.
$13.02
In Stock
(11)
PartSelect #:PS471605
Manufacturer #:5304409888
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryer...
$8.02
In Stock
(5)
PartSelect #:PS2349721
Manufacturer #:318406100
The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to...
$38.41
In Stock
PartSelect #:PS2378854
Manufacturer #:316117502
$153.83
In Stock
(3)
PartSelect #:PS9864838
Manufacturer #:5304494997
This includes pan and insert.
$49.57
In Stock
(4)
PartSelect #:PS439060
Manufacturer #:316116400
The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to rem...
$36.85
In Stock
PartSelect #:PS1146808
Manufacturer #:316445501
This oven door light switch signals the light to turn off when the oven door closes. If your light switch is defective or you smell a burning odor, make sure to check the switch an...
$54.36
In Stock
PartSelect #:PS470510
Manufacturer #:5304400195
This is a light lens retainer clip and it is used in conjunction with the oven on your range. This retainer clip secures the light lens to the oven cavity. The part is made entirel...
No Longer Available
PartSelect #:PS978528
Manufacturer #:318165800
$11.98
In Stock
Questions and Answers for FGET3065KFA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven not heating to desired temperature

Temperature Sensor – Part Number: 316217002
  • Customer: Dan from Bellevue, ID
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 136 of 199 people found this instruction helpful
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with tw... read more

Cord was not tightened enough by delivery crew.

  • Customer: Timothy from Spring Valley, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 87 of 130 people found this instruction helpful
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screw... read more

Cracked oven door inner glass

Inner Oven Door Glass – Part Number: 316117500
  • Customer: Mitch from Fernandina Beach, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 71 of 96 people found this instruction helpful
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The... read more