FGES3065KFC Frigidaire Wall Oven - Overview
Sections of the FGES3065KFC
[Viewing 7 of 7]Manuals & Care Guides for FGES3065KFC
Click to downloadInstall
Installation Instructions
(8.69MB)
Manual
Owner's Manuals
(22.77MB)
Specs
Product Specifications Sheet
(2.12MB)
Wiring
Wiring Diagram
(0.39MB)
Keep searches simple, eg. "belt" or "pump".

Light Bulb
PartSelect #: PS12751166
Manufacturer #: 316538904
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If...
$19.71
In Stock

Main Terminal Block Kit
PartSelect #: PS471605
Manufacturer #: 5304409888
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches...
$9.38
In Stock

LENS
PartSelect #: PS16218465
Manufacturer #: 5304524341
The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing...
$10.89
In Stock

GLASS
PartSelect #: PS11728351
Manufacturer #: 5304503232
This tempered glass is supplied by the original manufacturer and measures 20 inches by 13 inches. It is an inner door glass, designed for use in ranges/ovens and has several purposes which include pro...
$84.88
In Stock

Radiant Element with Limiter - 1200W
PartSelect #: PS1528719
Manufacturer #: 318178110
This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top of the range, also kn...
39% OFF
$91.02
$150.00
In Stock

Temperature Sensor
PartSelect #: PS11758156
Manufacturer #: 5304504897
39% OFF
$27.66
$45.47
In Stock

ELEMENT
PartSelect #: PS16763418
Manufacturer #: 5304533520
Dual Radiant Surface Element
$60.89
In Stock

Broiler Pan Grate Insert
PartSelect #: PS9864838
Manufacturer #: 5304494997
This OEM broiler pan and grate insert are cooking accessories used in your oven to broil food. The pan catches drippings and prevents them from falling into the appliance, while the grate insert ensur...
$68.18
In Stock

Oven Light Socket
PartSelect #: PS439060
Manufacturer #: 316116400
The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel t...
$46.54
In Stock

Screw
PartSelect #: PS461124
Manufacturer #: 5303288565
This is an authentic mounting screw, which works with ranges, wall ovens, cooktops and warming drawers.
$9.45
In Stock
Questions And Answers for FGES3065KFC
Ask our experts a question about this model and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Errol
July 28, 2021
Two burners stopped working simultaneously while being used. The other two will not come on. The fans work and burner indicator lights still come on. Also the oven still works. Do you have any suggestion on what is causing this? Thanks!
For model number FGES3065KFC
Hello Errol, Thank you for the question. This is normally an indication the Controller Assembly for the Burner Switches is defective and will need to be replaced. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Martin
December 21, 2023
Oven heats up to 180+ then stops or slowly heats but really stops completely.
For model number FGES3065KFC
Hi Martin, thank you for contacting us. We have concluded that the issue is with the temperature sensor, part number PS16745361, and it may need to be checked. If this part is faulty, you may need to replace it. Let us know if you have further questions!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Errol
February 10, 2023
This range, without being used, started beeping while displaying an F20 error code. Additionally, a blower comes on and off, and a clicking sound like a switch opening and closing can be heard. Tried turning on the oven…it came on briefly, got to 110, then shut down and beeped without the F20 error code. The stove burners work. Do you have any idea what may be causing this problem?
Thank, Errol.
For model number FGES3065KFC
Hi Errol, thank you for the great question. The F20 error code is a communication error between the display control board and the relay control board. Pull the oven forward and remove the back panel. Check the wire connections between the display board and the relay board. If the connections check good, replace the display control board, part number PS2368471. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts:
Errol
September 17, 2023
Hi, I am getting the F20 error code and accompanying incessant beeps on this range when it’s not even being used. and everything looks good. i have replaced the display control board. I can hear a clicking sound like a switch or contact opening and closing during these episodes. can also hear the blower/fan cycling on and off. I am now suspecting the interface control board. Do you have any suggestions as to what the problem could be. This same issue happened a few months ago, and then stopped. Thanks!
For model number FGES3065KFC
Hello Errol, thank you for reaching out. As you have replaced the display control board and the temperature sensor. You have also checked the relay control board and still the problem persists. We would recommend replacing the control board, part number PS2368471, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the FGES3065KFC
[Viewing 6 of 6]Element will not heat
Fixed by
these parts
these parts



Show All
Little to no heat when baking
Fixed by
these parts
these parts



Show All
Will Not Start
Fixed by
these parts
these parts



Show All
Oven is too hot
Fixed by
these parts
these parts

Show All
Oven not heating evenly
Fixed by
these parts
these parts


Show All
Little to no heat when broiling
Fixed by
these parts
these parts

Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cord was not tightened enough by delivery crew.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools neede
... Read more
d are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Read less
Parts Used:
-
Timothy from Spring Valley, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
101 of 161 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burned out burner
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the differ
... Read more
ent sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
Read less
Parts Used:
-
Lori from Winter Haven, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
67 of 90 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cracked oven door inner glass
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door
... Read more
from the inside. The inner glass is contained in a metal frame with another piece of glass; this frame comes apart easily using the clips in each side. The door assembles easily after the glass is replaced; just take your time and give yourself enough room to lay out the parts as you go. Good luck!
Read less
Parts Used:
-
Mitch from Fernandina Beach, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
74 of 121 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!