Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FGB500CEBF

FGB500CEBF Frigidaire Wall Oven - Overview

Get Parts and Repair Help for FGB500CEBF

If you know the wall oven repair part you need, you can browse the list of all parts on the FGB500CEBF, or you can search by name or part description. You can also find your part by where it is located on the FGB500CEBF by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for FGB500CEBF parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$23.65

Light Bulb Lens

The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to...

Order within the next 5 hrs and your part ships today!
$30.10

Oven Light Socket

The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel to access the socket for the repair. You will also need to remove the current light bulb and the light lens cover so that the old socket can be removed. As you will be working around electrical circuits for this repair, be sure to disconnect the power source from the oven before you begin work on the oven.

Order within the next 5 hrs and your part ships today!
$9.73

LAMP

Order within the next 5 hrs and your part ships today!
$35.45

Rack

Order within the next 5 hrs and your part ships today!
$6.92

SCREW

Order within the next 5 hrs and your part ships today!
$214.93

Flat Glow Bar Igniter

This flat glow bar igniter is designed for gas ovens. The function of the part is to ignite the gas to light the oven burner. If your gas igniter does not glow, or if it glows but will not light, you may need to replace this part. The flat glow bar igniter is in the back of your gas oven. You will need to remove the access panel on the back of your oven to disconnect the igniter. Be sure that the gas source to the oven is shut off before you begin this repair. This part is sold individually.

Order within the next 5 hrs and your part ships today!
$35.52

Light Lens Retainer Clip

This is a light lens retainer clip and it is used in conjunction with the oven on your range. This retainer clip secures the light lens to the oven cavity. The part is made entirel...

Order within the next 5 hrs and your part ships today!
$21.40

Oven Light Rocker Switch

Order within the next 5 hrs and your part ships today!
$80.44

Exterior Drawer Glass - Black

Order within the next 5 hrs and your part ships today!
$4.19

Thermostat Bulb Clip

Order within the next 5 hrs and your part ships today!

Common Symptoms of the FGB500CEBF

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven light receptacle broken - bulb base broke off

  • Customer: Paul from Spokane Valley, WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 39 of 51 people found this instruction helpful
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snap... read more

broken lens over oven light

  • Customer: Leslie from Warsaw, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 20 people found this instruction helpful
Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service..... read more

Over door light needed to be replaced

  • Customer: Joseph from MIAMI GARDENS, FL
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Pulled out the old light on the front of the door house where the door closes and replaced the door light switch read more