EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

FB4337NS LG Range - Overview

Diagrams for FB4337NS

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Temperature Sensor – Part Number: EBG61305805
$75.13
In Stock
Temperature Sensor
★★★★★
★★★★★
(3)
Part #EBG61305805
This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element, depending on what is needed. If your appliance is being improperly heated or cooled, the temperature sensor may be to blame, and can be tested with a multimeter to check for continuity to see whether it is defective. Check your user manual for exact placement of this thermistor and any diagnostic information.
Oven Igniter – Part Number: MEE61841401
$188.36
On Order
Oven Igniter
★★★★★
★★★★★
(24)
Part #MEE61841401
This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for generating the heat needed to ignite the gas and create a flame for you to cook your food. You can find the igniter located near the oven burner. If your igniter is faulty, you will likely notice that it does not glow, or it glows dimly, the flame is weak, or there is no ignition at all. If the igniter is cracked or visibly damaged in any way it is best to replace it to ensure your safety.
FOOT – Part Number: 4778W1N001B
$21.45
In Stock
FOOT
★★★★★
★★★★★
(1)
Part #4778W1N001B
This is a genuine OEM leveling leg for various models of LG ranges. This leg is used to stabilize and support the range, and if damaged, broken, or missing, will cause your range to rock back and forth. Installing this leg simply requires you to lift on the corner you are installing it under, and then screw it in place until your range is stable. This approximately 2-inch leveling leg is sold individually, so if your range has multiple legs that are broken or missing, consider how many legs you need to order.
SWITCH ASSEMBLY – Part Number: EBF60662911
$75.13
In Stock
GRILLE ASSEMBLY – Part Number: AEB72914208
$119.53
On Order
GRILLE ASSEMBLY
★★★★★
★★★★★
(1)
Part #AEB72914208
This is a griddle pan for different models of LG ranges. This griddle pan measures 20 inches long and 8.5 inches wide. This pan is used as a griddle surface on LG stoves and cooktops and is exposed to heat and food contamination as a result. If your griddle pan has begun to warp or pit, or no longer cooks properly due to damage or food build-up, it must be replaced. This griddle is sold individually and does not come with any other parts or accessories.
Bracket,Idle – Part Number: MAZ61859001
$27.36
Special Order
Bracket,Idle
Part #MAZ61859001
Pressure Regulator – Part Number: MDW61841001
No Longer Available
Pressure Regulator
Part #MDW61841001

Common Symptoms of the FB4337NS

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven wouldn't ignite
11 of 22 people found this instruction helpful.
  • Martin from KEWASKUM, WI
  • Easy
  • 15 - 30 mins
  • Nutdriver
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
Was this helpful?
Thank you for voting!
Oven would not light
9 of 26 people found this instruction helpful.
  • Sheila from HOPKINTON, MA
  • Very Easy
  • 30 - 60 mins
As soon as my husband put it in the oven, the very thin prongs broke. There was no guard on either side of the prongs for protection like the one that had been in there. Very costly to us of $185 with no fix. Very disappointed in that ignitor. It would have been an easy fix. Had replaced one previously but it only lasted 6 months. Now we have a new stove
Was this helpful?
Thank you for voting!
Both ovens would not light
1 of 2 people found this instruction helpful.
  • George from Meadows Place, TX
  • Really Easy
  • More than 2 hours
  • Screw drivers
Remove oven bottoms Removed burners Remove igniters Pull out oven removed back disconnect wiring Installed new parts on burner made wiring hook ups Installed oven back and oven bottoms Tested and both work Took so long because I’m 75 years old Thanks for the proper parts
Was this helpful?
Thank you for voting!