EX300D52011 Subaru Engine - Overview

This is a genuine replacement part made for Subaru/Robin engines. This item is used with the carburetor. An O-ring is used to prevent loss of pressure by creating a seal between solid parts. An intact O-ring is essential for proper performance of machinery. Sold individually.

This item is an authentic Subaru/Robin replacement part that has been sourced from the original manufacturer to be used with small engines. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. This item is available as an individual replacement part.

This item has been sourced from the original manufacturer to be used with small engines from Subaru/Robin. The gasket is used to seal the connection between the carburetor and the insulator assembly. It is recommended to replace gaskets when servicing the engine to ensure proper seals when the parts reassembled. This item is available as a single item.

An oil drain plug is a part designed to facilitate a convenient and controlled method for draining the oil from an engine and is commonly positioned at the lower part of the machine, threaded into the oil sump or pan, offering an easier point for oil removal. This plug is designed for use within various types of small engine equipment and...Read more requires a hex socket wrench to remove and install. This plug is an OEM part that is sold as an individual and prevents any oil from leaking from the oil sump/pan and need only be removed for oil changes. If you notice an oil leak or poorer performance from your equipment, it may be due to an oil leak caused by a broken or loose plug. To replace this plug, ensure you use the torque setting set by the manufacturer of your equipment to properly secure it.

This is a genuine OEM supplied component which is specially made for use with Subaru / Robin engines commonly installed on lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit, please make sure to refer to the appropriate diagrams for the correct location and applica...Read moretion of this part. Keep in mind this high-quality flange bolt is made of durable metal and is sold individually.

It is an authentic manufacturer sourced replacement part designed for use with Subaru / Robin engines. This carburetor gasket provides an air tight seal between the carburetor and the insulator. Over time gaskets tend to deteriorate and crack eventually requiring replacement. It is made from high quality composite material and it is sold individually.

This OEM flange nut in your engine is a fastener that secures different engine assemblies, like the intake system or the fuel tank. It has a wide, flat base for stability and even load distribution. With a diameter of 6 mm, a thread pitch of 1 mm, and a flange diameter of 13 mm, it is commonly found at assembly attachment points or in are...Read moreas that vibrate. You can tell if a flange nut is broken by checking for bending, cracking, or missing pieces. You may also notice loose assemblies. Not replacing a broken flange nut can lead to issues such as air or fuel leaks and a loss of engine power. To remove a damaged nut, consult your user manual for its location and use a wrench or socket to unthread it. Please note that this flange nut is sold individually, so it is essential to confirm the quantity required for your specific machine. It is also a good idea to keep some extras on hand for future repair needs.

The rocker arm attaches to the rocker pin. This genuine item is supplied by the original equipment manufacturer for use with Subaru and Robin engines. It is made of metal and is sold individually. A socket set might be necessary during the installation of this part. This item will need to be replaced if it breaks.

This gasket, also known as the oil drain plug gasket, is a ring-shaped, metal component used in outdoor power engines. It is supplied by the manufacturer and can be found at the bottom of the engine oil pan where the drain plug is installed. The gasket is responsible for sealing the area between the oil drain plug and the engine block to ...Read moreprevent oil from leaking during oil changes. Over time the gasket can wear down, corrode, or crack. If the gasket can no longer seal the area, oil will escape from the oil pan, leading to inadequate lubrication, increased friction, and engine damage. Before you begin the repair, drain the oil from the engine to prevent contamination. Use a wrench to loosen and remove the oil drain plug. Peel off the old gasket, and thoroughly clean the drain plug and oil pan surface. Install the new gasket and ensure that it sits firmly on the oil pan. Finally, reinstall the drain plug, and be careful to avoid overtightening it.

A genuine item which is supplied directly from the original equipment manufacturer for use with Subaru/Robin engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or damaged component which was installed on a new unit. The gauge allows a user to check the level of oil in the engine. Keep in ...Read moremind this high-quality part is made of durable plastic material and is sold individually.