EU2000I (AN1) Honda Generator - Overview

This is a genuine manufacturer-sourced replacement component which is specially designed for use with Honda engines commonly installed on lawn and garden equipment. Its purpose is to provide an air-tight seal for the carburetor. Over time gaskets tend to wear out and crack eventually requiring replacement to maintain peak performance. This part is made of high-quality composite material and it is sold individually.

This is an authentic Honda replacement part, sourced from the original manufacturer for use with small engines. The special hex head bolt is commonly used to secure the ignition module assembly. This flanged bolt is available as an individual replacement part, please see illustrated part list for associative parts.

This replacement fuel filter is an authentic OEM part that is specially made for use with Honda engines commonly installed on Toro lawn and garden equipment. The purpose of this part is to filter out dirt and other contaminants from fuel that goes into the carburetor. Over time it may get clogged and restrict the fuel flow eventually requiring replacement. Please note this plastic fuel filter is sold individually.

It is an authentic replacement o-ring that is supplied by original equipment manufacturer for use with Honda engines. This is the item that creates a seal between the camshaft pulley and the shaft, for correct application please make sure to check appropriate diagrams of your model. Over time the material may deteriorate and crack allowin...Read moreg for leaks, if this happens the o-ring will need to be replaced. Please note this durable rubber item is sold individually.

This is a genuine manufacturer-approved component which is specially made for use with Honda engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a faulty nut that helps to secure the tappet adjusting screw. Please make sure to refer to the appropriate diagrams of your model for the corr...Read moreect location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an authentic manufacturer-sourced part that is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is an identical replacement for a faulty or a damaged tappet adjusting screw that was installed on a new unit. The purpose of this item is to secure a valve rocker arm, please make sure t...Read moreo refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This part is an OEM sourced directly from the manufacturer for use in small engines and generators made by Honda. The air in joint gasket attaches to the air cleaner housing. A screwdriver and a socket set may be necessary during the installation of this part. The gasket is made out of a thin material and will need to be replaced if it breaks. This is available as an individual replacement part.

This high-quality part is made of metal and is priced individually. The rocker arm shaft attaches to the in valve rocker arm. A set of pliers, a socket set, and a screwdriver might be necessary during the installation of this part. It will need to be replaced if it becomes broken. This part is a genuine OEM sourced part which is specifically designed for use with Honda and Toro small engines.

This item is an authentic OEM part which is made for use with Honda engines commonly installed on a variety of lawn and garden equipment. The clip is utilized to secure the fuel tube. If the clip is damaged or is missing, this will provide an identical replacement for a missing or a damaged component that was installed on a new unit. Chec...Read morek the diagrams of your model for the exact location and the correct application of this hardware. One durable metal clip is included. You may need pliers to secure and remove it.

This lower cover provides protective enclosure for internal components near the base of the unit. Built for durability, it helps maintain structural integrity and a finished appearance.

The flange bolt is used to secure parts together in a variety of lawn and garden outdoor equipment. It is sourced directly from the manufacturer and has a diameter of 6mm and a length of 12mm. The bolt is made of metal and has a ring-shaped rim on one end known as a flange. This flange helps to secure the bolt in place and prevents it fro...Read morem falling off during use. Inspect all the bolts on your equipment as you may need more than one. If you note that any of them are deformed, corroded or the threads are worn down, you will need to replace them as each bolt is sold individually. Remove the damaged bolt and thread the new one on with your hands before tightening with a wrench.

It is an authentic OEM sourced part, it is specially designed for use with Honda engines commonly installed on lawn and garden equipment. This component is generally utilized to provide a tight seal for the valve stem, unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement. Please make sure t...Read moreo check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality seal is made of durable rubber and is sold individually.