Models
>
ERSD48NGH
ERSD48NGH Dacor Range - Overview
Sections of the ERSD48NGH
[Viewing 11 of 11]
Keep searches simple, eg. "belt" or "pump".
SVC-HALOGEN BULB 10W 12VAC;86573,ERD36S0
PartSelect #: PS16629306
Manufacturer #: DE81-05142A
$42.54
In Stock
SVC-IGNITER
PartSelect #: PS16556793
Manufacturer #: DE81-02696A
This single igniter assembly kit is also known as a spark igniter, igniter service kit, spark electrode, or burner igniter. The kit is a genuine OEM replacement kit that is sourced directly from the m...
$71.51
In Stock
SVC-ASSY WINDOW PACK 1 INCH1;12470,ERD36
PartSelect #: PS16628317
Manufacturer #: DE81-03804A
This window pack is also known as an oven door window pack assembly and is a part for your range. The window pack forms a see-through heat barrier within the oven door glass. Before making any repairs...
$518.11
Special Order
SVC-SCREW WAFER HD;83534,#8 X 3/8,DH3006
PartSelect #: PS16627282
Manufacturer #: DE81-02250A
$4.08
In Stock
SVC-BRASS NUT CB HEAD;86405,DTCT304GB/LP
PartSelect #: PS16556808
Manufacturer #: DE81-07824A
$10.83
In Stock
SVC-O RING D BURNER;86395,DTCT304GB/LP
PartSelect #: PS16631811
Manufacturer #: DE81-08744A
This is a burner head O-ring and is used in conjunction with your range cooktop. The purpose of the O-ring is to sit between the range cooktop and the burner head assembly. This part will create a sea...
$31.04
Special Order
SVC-KNOB EPICURE;62021B,EGR30S06BK
PartSelect #: PS16632295
Manufacturer #: DE81-09529A
$16.15
Special Order
SVC-DBURNER CAP LARGE;72435SB,DTCT304GB/
PartSelect #: PS16630480
Manufacturer #: DE81-06694A
$20.60
In Stock
SVC-FILTER CONVECTION OVEN;82891,DO130
PartSelect #: PS16629177
Manufacturer #: DE81-04961A
$4.08
Special Order
SVC-TEMPERATURE SENSOR;62593,E30DF74EPS
PartSelect #: PS16556806
Manufacturer #: DE81-07677A
$101.69
In Stock
SVC-TEMP SENSOR KIT ROBERTSH;86663,ERSD3
PartSelect #: PS16628410
Manufacturer #: DE81-03937A
$129.39
In Stock
Questions And Answers for ERSD48NGH
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
F2 Alarm and oven beeping
-
David from CAMILLUS, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced bottom relay control panel
First disconnected power to the oven at circuit breaker box. Then, Removed top front control panel, held by four screws exposed when top oven door is opened. Was able to move control up and out of the way without disconnecting. The relay control panel is visible on the right. I was able to reach all connectors with needle nose pliers and then remove the panel with needle nose to release clips and use screw driver to gentle pry up. Installed new unit by attaching back connectors and then setting panel down onto clips. Finished with attaching front connectors. Reattach front control panel.
Parts Used:
-
David from BUENA VISTA, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dacor sent a different bulb # which I CANNOT get back into the oven.
I have contacted Dacor repeatedly with no response, by both phone and left my return contact and email.
I could not be more disappointed in Dacor. All this for a problem which is listed as a home maintenance issue. A light bulb for $41.77 that I cannot install.
I could not be more disappointed in Dacor. All this for a problem which is listed as a home maintenance issue. A light bulb for $41.77 that I cannot install.
Parts Used:
-
Marilyn from INDIAN WELLS, CA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
