This genuine OEM halogen bulb provides bright, heat-resistant interior lighting for select wall ovens and ranges, making it easy to check cooking progress. Rated at 10 watts and 12 volts with a G4 bi-pin base, it’s a simple plug-in replacement for a dim, flickering, or burnt-out oven light. Designed for specific models, it restores clear visibility inside the oven for everyday cooking.
This is a burner head O-ring and is used in conjunction with your range cooktop. The purpose of the O-ring is to sit between the range cooktop and the burner head assembly. This part will create a seal,which will limit the risk of fuel leaks over time. Due to natural wear and tear this part may dry out or crack. If this happens, you will need to replace this part. We also reco
This temperature sensor kit monitors operating temperatures and sends accurate readings to the control system. Designed for precision, it supports proper regulation and consistent appliance performance.
This oven door hinge assembly supports controlled opening and closing while helping the door remain properly aligned. Replace a worn or damaged hinge when the oven door no longer moves or sits as it should. Verify fit with your appliance before ordering.
This hot surface igniter heats to a high temperature to ignite gas for reliable burner operation. It is replaced when ignition is inconsistent, delayed, or fails entirely.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
F2 Alarm and oven beeping
3 of 3 peoplefound this instruction helpful.
David from CAMILLUS, NY
Easy
15 - 30 mins
Screw drivers
Replaced relay board
Was this helpful?
Thank you for voting!
Temp sensor is failing
3 of 5 peoplefound this instruction helpful.
Sarah from FORT COLLINS, CO
Really Easy
30 - 60 mins
I did not do the repair since the part shipped was not the correct one. I have contacted Customer Service by phone and mail and nothing has been resolved.
I would, at least, like to return the incorrect part. An new one would be great but not holding out hope.
Was this helpful?
Thank you for voting!
Replaced bottom relay control panel
2 of 2 peoplefound this instruction helpful.
David from BUENA VISTA, CO
Really Easy
30 - 60 mins
Screw drivers
First disconnected power to the oven at circuit breaker box. Then, Removed top front control panel, held by four screws exposed when top oven door is opened. Was able to move control up and out of the way without disconnecting. The relay control panel is visible on the right. I was able to reach all connectors with needle nose plie
... Read morers and then remove the panel with needle nose to release clips and use screw driver to gentle pry up. Installed new unit by attaching back connectors and then setting panel down onto clips. Finished with attaching front connectors. Reattach front control panel.