ERG36 Dacor Range - Overview
Sections of the ERG36
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
SVC-SET GRATE SUPPORTPAD KIT;66916,ERD36
PartSelect #: PS16628397
Manufacturer #: DE81-03916A
The rubber feet, also known as the burner grate foot, is used on the bottom of gas burner grates for a range and cooktop. The rubber feet help the grates sit on the top of a burner cap properly and wo...
No Longer Available
Halogen Bulb
PartSelect #: PS16629306
Manufacturer #: DE81-05142A
This genuine OEM halogen bulb provides bright, heat-resistant interior lighting for select wall ovens and ranges, making it easy to check cooking progress. Rated at 10 watts and 12 volts with a G4 bi-...
$42.12
Special Order
Igniter Assembly Kit
PartSelect #: PS16556793
Manufacturer #: DE81-02696A
This single igniter assembly kit is also known as a spark igniter, igniter service kit, spark electrode, or burner igniter. The kit is a genuine OEM replacement kit that is sourced directly from the m...
$63.64
In Stock
SVC-FILTER CONVECTION OVEN;82891,DO130
PartSelect #: PS16629177
Manufacturer #: DE81-04961A
No Longer Available
SVC-SCREW PHIL WAFER;83263,#8X3/8,DCT305
PartSelect #: PS16627342
Manufacturer #: DE81-02331A
$6.40
In Stock
Hot Surface Igniter
PartSelect #: PS16554196
Manufacturer #: DE81-07046A
This hot surface igniter heats to a high temperature to ignite gas for reliable burner operation. It is replaced when ignition is inconsistent, delayed, or fails entirely.
$187.64
On Order
SVC-HINGE EPICURE 36 DOOR;62436,ERD36SBK
PartSelect #: PS16556802
Manufacturer #: DE81-05852A
No Longer Available
Questions And Answers for ERG36
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Flame was not even all around.
Cleaned the brass ring and replaced the cap.
New brass rings may be an improvement too.
New brass rings may be an improvement too.
Parts Used:
-
Keith from MIAMI, FL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dacor sent a different bulb # which I CANNOT get back into the oven.
I have contacted Dacor repeatedly with no response, by both phone and left my return contact and email.
I could not be more disappointed in Dacor. All this for a problem which is listed as a home maintenance issue. A light bulb for $41.77 that I cannot install.
I could not be more disappointed in Dacor. All this for a problem which is listed as a home maintenance issue. A light bulb for $41.77 that I cannot install.
Parts Used:
-
Marilyn from INDIAN WELLS, CA
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Parts Used:
-
David from MCKINNEY, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
3 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!