ER36GISCHNGH Dacor Range - Overview

This illuminated control knob is designed to provide precise, easy control of cooking functions while improving visibility through built-in lighting. Crafted with a durable stainless steel finish, the knob fits securely onto a D-shaped control shaft and allows users to adjust temperature or burner settings smoothly and accurately. The ill...Read moreumination feature enhances usability by making settings clearly visible, especially in low-light conditions. Replacement is recommended if the original knob is worn, damaged, difficult to turn, or no longer lights up properly, as installing a new illuminated knob restores reliable control, safe operation, and the appliance’s original appearance.

Restore visibility inside or beneath a compatible cooking appliance with this low-voltage halogen replacement bulb. Rated at 12 volts and 20 watts, it features a G4 two-pin base that fits into the appropriate socket. A burned-out, flickering, cracked, or darkened bulb may indicate that replacement is needed. Before installation, disconnec...Read moret the appliance from power, let the bulb and surrounding surfaces cool, and avoid touching the new bulbs glass directly. Confirm the electrical rating and socket style before purchase.

Help the oven heat more evenly with this temperature sensor for select ranges, wall ovens, and microwave oven combos, a bad sensor can send the wrong heat reading, which may cause poor baking, long preheat times, or heat that does not shut off when it should, disconnect power before repair, use the exact model number to confirm fit.

A burner that clicks without lighting?or does not spark at all?may have a problem in the ignition system. The replacement spark module provides the electrical pulses that travel to the burner electrodes and ignite the released gas. Replacement may be needed when sparks remain weak, delayed, or absent after the electrodes, switches, wiring...Read more, burner caps, and gas supply have been checked. Several faults can cause the same symptoms, so proper testing is important. Turn off electrical power and close the gas valve before service. Reconnect wires exactly as shown in the appliance diagram, and check for gas leaks using an approved method before operating the appliance.

This hot surface igniter heats to a high temperature to ignite gas for reliable burner operation. It is replaced when ignition is inconsistent, delayed, or fails entirely.