Help the oven heat more evenly with this temperature sensor for select ranges, wall ovens, and microwave oven combos, a bad sensor can send the wrong heat reading, which may cause poor baking, long preheat times, or heat that does not shut off when it should, disconnect power before repair, use the exact model number to confirm fit.
This metal oven rack provides a stable, level surface for bakeware and cookware inside select 30-inch ranges and wall ovens. It can replace a rack that is bent, warped, rusted, damaged, or missing. Installation is completed by sliding the rack onto the existing oven guides and does not require tools. Confirm the rack size and appliance fit before ordering, since oven width alone does not guarantee compatibility.
A burner that clicks without lighting?or does not spark at all?may have a problem in the ignition system. The replacement spark module provides the electrical pulses that travel to the burner electrodes and ignite the released gas. Replacement may be needed when sparks remain weak, delayed, or absent after the electrodes, switches, wiring...Read more, burner caps, and gas supply have been checked. Several faults can cause the same symptoms, so proper testing is important. Turn off electrical power and close the gas valve before service. Reconnect wires exactly as shown in the appliance diagram, and check for gas leaks using an approved method before operating the appliance.
This display module is also known as an oven control board. This part is the brain of your appliance. It monitors and displays the internal temperature of your range oven. The control board allows you to control the heating functions of the appliance. You can set the desired cooking temperature, select if you want the bake, broil, or warm...Read more function, and set a timer. This digital display will also function as a clock when the oven is not in use. Before you replace this part you should check it with a multi-meter to ensure it is faulty. Problems with the control board are often misdiagnosed. This replacement display module also included the filter.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Two striped out screw heads
3 of 10 peoplefound this instruction helpful.
David from MCKINNEY, TX
Easy
Less than 15 mins
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.