EIMGD55IIW2 Electrolux Dryer Parts & Repair Help | PartSelect
Models > EIMGD55IIW2

Manuals & Care Guides for EIMGD55IIW2

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
PartSelect #:PS417085
Manufacturer #:131168200
Sold individually.
$8.58
In Stock
(3)
PartSelect #:PS459818
Manufacturer #:5303281135
This part senses the flame for heat allowing the gas valve to open. The most common issue that might arise that would indicate the flame sensor needs to be replaced is your dryer i...
$21.98
In Stock
(12)
PartSelect #:PS2349312
Manufacturer #:134793600
Located at the front of the washing machine, this dryer lint filter traps lint and debris from the exhaust air flowing out of the dryer drum. This part measures approximately 14 in...
$52.23
In Stock
PartSelect #:PS474458
Manufacturer #:5308027429
This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temper...
$35.18
In Stock
(5)
PartSelect #:PS7783961
Manufacturer #:137539200
$19.34
In Stock
(1)
PartSelect #:PS2349303
Manufacturer #:134786100
$45.40
In Stock
(3)
PartSelect #:PS4704883
Manufacturer #:134711401
$17.72
In Stock
PartSelect #:PS3495292
Manufacturer #:137380600
This part is the replacement screw for your washer. The head is approximately inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold i...
$6.65
In Stock
PartSelect #:PS2349290
Manufacturer #:134715900
This is a genuine replacement drum roller for a dryer. This part includes a roller which has an axle and two tri-rings. The dryer drum roller holds the drum in place while it rotat...
$37.01
In Stock
(1)
PartSelect #:PS12585650
Manufacturer #:5304517325
This part ignites the gas within the dryer.
$137.74
In Stock
Questions and Answers for EIMGD55IIW2
Be the first to ask our experts a question about this model!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Gas flame turns off after a while. No more heat.

Flame Sensor – Part Number: 5303281135
  • Customer: Giuseppe from San Francisco, CA
  • Difficulty: Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 19 of 22 people found this instruction helpful
Fixed it eventually with part PS470049 ('M' Series Ignition Coil Kit). See separate story.

The flame sensor did not fix it but read on for info on how to replace this part. Before replacing this part, I should have read another posting in a different web site about the ignition coils: if you see a red glow inside the burner unit but the flame does... read more

Dryer would not ignite

Flame Sensor – Part Number: 5303281135
  • Customer: David from Murrieta, CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 16 of 18 people found this instruction helpful
Make Sure Dryer is off and disconnected from power! Also, beware of sharp edges on dryer parts and cabinet.
1) Popped-off top lid with flat-blade screw driver (Insert screw driver in joint between top and front of dryer above door) Spring clips are all that's holding top on in front
2) Unplugged plastic electrical connector located just along the ... read more

no heat in the dryer

Flame Sensor – Part Number: 5303281135
  • Customer: Joy from Lakeville, MN
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 16 of 19 people found this instruction helpful
unplugged the dryer, discontected the sensor and unscrewed the bracket, replaced the new one and put the connectors back on, screwed the bracket back on and that was it. Very easy fix for a female who does not do much of these sort of repairs but learning. read more