Restore efficient drying performance with this genuine heating element assembly for electric dryers. Designed to deliver consistent heat, it operates at 240 volts with dual power settings of 1900W and 700W for optimal drying results. The assembly weighs approximately 1.01 lbs and measures about 8.75 inches by 7.75 inches by 3.75 inches, e...Read morensuring a precise fit. Built for durability and reliability, this component is essential for fixing issues like no heat or uneven drying. Installation requires disconnecting power and following manufacturer guidelines for safe replacement.
This hinge is a replacement hardware component designed to support smooth opening and closing while maintaining proper alignment. It is commonly replaced when worn, bent, or causing the door to sag or bind.
This genuine OEM dryer motor assembly is responsible for driving the drum and blower, allowing clothes to tumble properly while maintaining consistent airflow during operation. As a key component of the dryer’s drive system, it supports reliable starting, smooth rotation, and efficient drying performance. Replacing a failing motor can res...Read moreolve issues such as the drum not spinning, unusual noises, or the dryer failing to start, helping restore normal, dependable operation.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
ROBERTA - For model number EIED2CAQSW00
October 24, 2023
beeps every 30 secs - WHY
Hello Roberta, thank you for the question. According to our research, if you do not remove the dried load promptly at the end of the cycle. The dry load will continue tumbling without heat to help reduce wrinkling. When the chime is selected, a beep will be heard periodically. If the issue still occurs, you may need to check the door switch, part number PS11699958, to fix the issue. We hope this helps!
Hello Harvey, thank you for contacting us. According to our research, we would recommend checking the user interface control board, part number PS12746120, to fix the issue. We hope this helps!
Hi Harvey, thank you for the question. The error code E50 indicates an issue with the motor. First, you may need to make sure that you are able to rotate the drum by hand. Also, ensure that the belt and the pulley are properly secured. Inspect the motor for any visual damage and loose connections. If that is not causing the issue, then you may need to check the control board, part number PS11700626, as it is most likely faulty and may need to be replaced. We hope this is helpful!
The dryer says the tank is full and needs to be drained. Is the pump shot or a blockage somewhere?
Hi Greg, thank you for the question. We would recommend checking the drain hose for any blockage first. If it is fine, the issue could be with the drain pump, part number PS11699909. You may need to replace it to fix the issue. We hope this sorts out your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken of catch
3 of 3 peoplefound this instruction helpful.
Kari from FOUNTAIN INN, SC
Very Easy
Less than 15 mins
Screw drivers
Super easy to fix! Unscrewed some screws, removed the broken latch on the door, put new one on, and put screws back in place. Thank you Parts select! I will definitely use this company again as needed!
Was this helpful?
Thank you for voting!
no part
2 of 4 peoplefound this instruction helpful.
Herbert J from SCOTRUN, PA
A Bit Difficult
Less than 15 mins
I ordered the part in October2020 and it is now December 17 2020, I have not received the part and if I go to my tracking number it is stuck on its way to the next facility with a date of December 7th.
My Orders
