Restore efficient drying performance with this genuine heating element assembly for electric dryers. Designed to deliver consistent heat, it operates at 240 volts with dual power settings of 1900W and 700W for optimal drying results. The assembly weighs approximately 1.01 lbs and measures about 8.75 inches by 7.75 inches by 3.75 inches, e...Read morensuring a precise fit. Built for durability and reliability, this component is essential for fixing issues like no heat or uneven drying. Installation requires disconnecting power and following manufacturer guidelines for safe replacement.
This hinge is a replacement hardware component designed to support smooth opening and closing while maintaining proper alignment. It is commonly replaced when worn, bent, or causing the door to sag or bind.
This genuine OEM dryer motor assembly is responsible for driving the drum and blower, allowing clothes to tumble properly while maintaining consistent airflow during operation. As a key component of the dryer’s drive system, it supports reliable starting, smooth rotation, and efficient drying performance. Replacing a failing motor can res...Read moreolve issues such as the drum not spinning, unusual noises, or the dryer failing to start, helping restore normal, dependable operation.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rob - For model number EIED200QSW00
November 23, 2022
Can the water from the dryer be hosed off instead of pulling the condenser draw out each time.?
Hello Rob, thank you for reaching out. We have researched and found a Direct Drain Kit for your model. The part number is PS11703515. This kit is designed to empty water from your condenser dryer, by draining it directly into a sink. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
I’m getting an error message E60 on my dryer. Can you tell me what that indicates. Dryer runs but does not heat up
Hello Tim, Thank you for your inquiry. An E60 error code on the dryer simply indicates a heating issue. First make sure your dryer is free from lint and debris and that there is sufficient air flow and venting. Next check the blower wheel and fan for any visible damage. The next parts to check are the heater, and the temperature sensor. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
I am looking for a thermal fuse the booklet said if dryer turns on but no heat replace fuse do you have this part?
Hello Karen and thank you for writing.
This part is discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry related parts for units just like yours. For example, part number PS11700550. Good luck with your repair.
My dryer is leaking water instead of collecting at the top. Could you tell me what part needs to be replaced. It gets a heat so i know it's not the thermostat.
Hello Eric, Thank you for the question. A clothes dryer will either leak because its exhaust system is clogged or it's not venting properly. We suggest opening the cabinet and cleaning any lint and dust built up. Remove the exhaust hose and make sure there is no build up and when installed it is sitting level with no dips. Also check the vent outside to be sure no one is trying to build a nest and causing poor air flow. We hope this helps.
Was this helpful?
Thank you for voting!
MIKE - For model number EIED200QSW00
August 8, 2023
EIED200QSW00 DYRER E50 ERROR CODE
Hello Mike, thank you for reaching out. According to our research, the E50 error code indicates that there is a problem with the motor. We would recommend checking the drive motor, part number PS11700550, to fix the issue. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken of catch
3 of 3 peoplefound this instruction helpful.
Kari from FOUNTAIN INN, SC
Very Easy
Less than 15 mins
Screw drivers
Super easy to fix! Unscrewed some screws, removed the broken latch on the door, put new one on, and put screws back in place. Thank you Parts select! I will definitely use this company again as needed!
Was this helpful?
Thank you for voting!
no part
2 of 4 peoplefound this instruction helpful.
Herbert J from SCOTRUN, PA
A Bit Difficult
Less than 15 mins
I ordered the part in October2020 and it is now December 17 2020, I have not received the part and if I go to my tracking number it is stuck on its way to the next facility with a date of December 7th.
My Orders
