EH035AX0203 Subaru Engine - Overview

This replacement primer bulb is specially designed for use with Makita trimmers and blowers. It is not an aftermarket equivalent, this is a genuine part sourced directly from original equipment manufacturer. By pressing the bulb, it will purge the air out of the carburetor. Then, the fuel will be forced up from the fuel tank through the f...Read moreuel line into the carburetor. The excess fuel will be sent back into the tank through the return line. Over time bulbs tend to deteriorate and crack requiring replacement. Replacing this primer bulb you will need a screwdriver. • Disconnect the spark plug • Remove the air filter cover • Drain the fuel from the tank • Remove the air cleaner base • Remove the carburetor • Remove the old primer bulb • Secure the new primer bulb • Reassemble and test the equipment

This replacement air cleaner cover is a genuine manufacturer-sourced part, it is specially designed for use with a variety of lawn equipment. The part helps to protect and secure the air cleaner element which is sold separately. It is made of high-quality plastic and is sold individually, keep in mind the hardware to secure it is not included.

This genuine OEM switch assembly is installed on the engine of your lawn and garden equipment. It consists of a plastic switch with an attached lead wire and is responsible for controlling the power supply to the engine. By toggling the switch on or off, it enables you to start or stop the machine. The switch assembly is typically secured...Read more on the engine shroud. If the switch assembly is malfunctioning, your engine will fail to respond to it. This can be due to a broken assembly or loose wiring connections. You can perform an electrical continuity test using a multimeter to verify its functionality. To replace the assembly, refer to your user guide to locate it on your machine. Disconnect the lead wire and unthread the tapping screws securing the assembly to the engine shroud. Once removed, you can detach it from your machine. Please note that the hardware required to secure the new assembly is not included and needs to be purchased separately.

The screw is an OEM direct from the Subaru / Robin manufacturer. The metal screw is made for use with many small engines. This part helps to secure the engine's speed control assembly. This component is sold individually. A screwdriver is of course, helpful in making the replacement. Please be sure to refer to the specific manual and diagrams for repair instructions.

This is a genuine manufacturer-approved part which is specially made for use with Subaru / Robin engines commonly installed on lawn and garden equipment. The purpose of this insulator is to provide a tight seal between the carburetor and the cylinder, unfortunately, over time it will wear out and it may begin to crack eventually requiring...Read more a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality insulator is made of durable plastic and is sold individually.

This is an authentic Subaru/Robin replacement part, sourced from the original manufacturer for use with small engines. The special gasket is commonly used to seal the connection between the carburetor insulator and the cylinder head. It is recommended to replace gaskets when servicing the carb to ensure proper seals when the parts are reassembled. This gasket is sold individually.

This is an authentic replacement element which is specially designed for use with Subaru / Robin engines commonly installed on lawn and garden equipment. The purpose of this component is to ensure the air that goes through the unit is free of dust and other harmful contaminants. Over time it will get dirty and clogged eventually requiring...Read more a replacement to ensure the proper airflow. Keep in mind this high-quality component is made of durable foam material and is sold individually.