EDR30S06 Dacor Range - Overview

The rubber feet, also known as the burner grate foot, is used on the bottom of gas burner grates for a range and cooktop. The rubber feet help the grates sit on the top of a burner cap properly and works to keep it leveled. This way you can place your pans and pots on an even surface. This part also prevents your burner grates from scratc...Read morehing and damaging the top of your stove. This can lead to friction and the paint on the stove top can chip. Make sure to unplug range from power source before installing this part.

This genuine OEM halogen bulb provides bright, heat-resistant interior lighting for select wall ovens and ranges, making it easy to check cooking progress. Rated at 10 watts and 12 volts with a G4 bi-pin base, it’s a simple plug-in replacement for a dim, flickering, or burnt-out oven light. Designed for specific models, it restores clear visibility inside the oven for everyday cooking.

This single igniter assembly kit is also known as a spark igniter, igniter service kit, spark electrode, or burner igniter. The kit is a genuine OEM replacement kit that is sourced directly from the manufacturer. It includes one igniter, one spring, one C-clip, and heat shrink tubing. These parts are what produces the spark that lights th...Read moree surface burner on your oven, range, or stove. Please note that this kit is for one burner only. It is recommended to check your other burner igniters in case they should be replaced as well. Check your original burner ring for holes, this kit will not be compatible with burner rings that have holes, and you may need a new one.

This is a burner head O-ring and is used in conjunction with your range cooktop. The purpose of the O-ring is to sit between the range cooktop and the burner head assembly. This part will create a seal,which will limit the risk of fuel leaks over time. Due to natural wear and tear this part may dry out or crack. If this happens, you will need to replace this part. We also reco

The bake element is located at the bottom of the inside of your oven. The bake element supplies an even heat to bake food in the oven. Elements can burn out over time and may need to be replaced. To install the new bake element, it is quite simple. You will need to turn the power off to the oven and remove the door and inner racks. The ba...Read moreke element will be secured in place by mount screws, which will need to be removed. The wires will need to be disconnected. You will then mount the new element into place. Be careful that the oven heat does not escape through the back end of the oven and burn the wires. All connections should be secured.