DWD110KR (Type 2) DeWALT Impact Driver - Overview

Length: 8' Gauge: 18 Wires: 2 Type: Bare Wire This cord is a genuine DeWalt replacement part. This cord is compatible with the list of models below. This part is made for double insulated tools It is a two wire cord with two prongs and does not need a ground wire. The cord is sold individually. Installation of this part requires the...Read more new cord wires to go correctly into wire terminals also routing the cord and wires in the right path can help avoid pinching when the tool case (Plate) is put back into place.

This is an OEM sourced replacement part which is specially designed for use with DeWALT and Black and Decker drills. It allows user to secure drill bits. The ratcheting action clicks the jaws tightly into place for reduced bit slippage. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entire...Read morely, a new chuck should fix the problem. NOTE: This 3/8" capacity chuck mounts to the drill using a 1/2"-20 threaded spindle. The light-weight plastic design provides comfort while the keyless two-sleeve construction adds the efficiency and ease-of-use of keyless bit-swapping. See our post on Removing a Cordless Drill Chuck if you need help replacing your old chuck.

Genuine OEM replacement part, this item is sold individually. This screw is used in various places in all of the tools listed below The most common use for this screw is to secure plastic housings together. It has a Torx T-20 head.

This is a genuine replacement part sourced from the original manufacturer for use with electric drills. The special level is used as an indicator to aid the operator with drilling even level holes. This level is available as an individual replacement part, please see model diagram for associative parts.

Included in part number 143835-02

This is an original part sourced directly from DeWalt. This grease was designed for use with the equipment listed below and helps to lubricate the system. This extends the life of the tool and protects parts from usual wear by allowing for easy movement. This item is sold individually.

This is an authentic manufacturer-sourced part which is specially designed for DeWALT drills. The part holds a carbon brush around the armature to provide stable and safe contact, please make sure to check the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item...Read more is made of durable materials and is sold individually. Note the carbon brush itself is sold separately.

Genuine Dewalt replacement part Includes 1 Carbon Brush sold individually, Two of these brushes are needed to complete a set for the tools shown below. Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking...Read more. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.