DW705STY6 DeWALT Miter Saw - Overview

This is a genuine Dewalt replacement part, it is sold individually. The purpose of the Blade Adapter, is to make the bore of a blade that is 1 inch and reduce to a 5/8 inch bore. Making it possible to use a 1 inch bore blade on a 5/8 inch arbor.

This brush and holder assembly is a genuine Dewalt replacement part, not aftermarket or generic. _b_This item is sold individually_/b_. As pictured, this item includes everything you need to replace a brush in your power tool. The brush, holder, terminals, and spring are included and ready for installation. If you only need the carbon ...Read morebrush and not this entire holder assembly, you can purchase the brush separately (see the 'Related Items' section below). This brush and holder is compatible with the tools listed below, but it is not guaranteed to fit any other power tools. It is advised that you replace both brushes only if you think all you need is one.

This replacement screw is an authentic manufacturer sourced item. It is commonly used with a variety of power tools. This screw is a standard hardware which has multiple uses based on equipment. To ensure correct location and application of this item please make sure to check appropriate diagrams. It is made out of metal and it is sold in...Read moredividually. Requires a torx or a flat-head screwdriver to tighten/loosen this screw.

This replacement screw is a high quality hardware commonly utilized on Bostitch, Black and Decker, Porter Cable and Dewalt equipment. This is a authentic OEM item which has multiple applications depending on the unit, for correct location and use of this screw make sure to check appropriate diagrams. Please note this torx screw is sold individually.

This cord protector is a genuine DeWalt replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.

The plastic dust duct attaches to the arm of the miter saw and directs the dust away from the device. This part is available individually and will need replacing if it becomes broken. The dust duct is for use in miter saws made by DeWALT and Black & Decker. This is a genuine replacement part sourced from the original manufacturer.

This is an Original Manufacturer Approved replacement part used on some Compound Miter Saws. This part is made out of Metal and it is Sold Individually. The purpose of this Clamp is to help securing a Blade to the unit.

This flanged sleeve, also known as a bushing or sleeve bearing, is responsible for securely connecting the guard link assembly to the upper guard assembly in your miter saw. It maintains stability and proper alignment between these two components. The guard link is the part that attaches to the blade guard and is responsible for lifting t...Read morehe guard when the saw blade is lowered. If you notice that the flanged sleeve is worn, damaged, or has excessive play, it can cause the guard link to become wobbly, restrict its movement, or produce unusual noises during operation. To replace the flanged sleeve, you will need a screwdriver with a Torx bit. Simply unscrew the screws on each end of the guard link to remove it along with the flanged sleeves. It is important to note that this replacement part is an authentic OEM component and is sold individually.

This item is a genuine DeWalt part that has been sourced from the original manufacturer. The retainer plate is intended to be used with miter saws. This item is part of the guard assembly and is used as a nut that secures the pivot plate. The retainer plate is priced as a single item.

Genuine Dewalt replacement part, this item is sold as a set. The 395674-02 Handle and Cover is the upper and lower Handle for the Dewalt Miter Saws listed below. This part holds the switch and cord. The 330019-32 Screws to assemble the Handle and Cover are not included with this part.