DW325C (Type 1) DeWALT Nailer - Overview

This is an authentic Bostitch replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The metal driver guide fits into the nose assembly and is used to keep the driver in the correct position. This part is sold as an individual replacement part.

This is a genuine Bostitch replacement part that fits all BT brad nailers and all S32 staplers. If trigger leaks air or if tool misfires often, try replacing trigger valve. This kit contains one (1) each of: valve assembly (including both O-rings), lubricant, spring pin punch, and repair instructions. Please note that two (2) O-rings are ...Read moreincluded but can also be purchased separately as parts # 106967 and # 86459. O-rings are easily damaged and worn out, causing tool issues, so it\\\'s a good idea to have a backup or two on hand. Only a hammer is needed for this repair.

Genuine Bostitch replacement part, this item is sold individually. This seal is placed on the the cylinder of the tools shown below. Its purpose is to keep air from leaking from inside the tool. This part can become brittle and stretch. When this happens it is advise to obtain part number RBK8 Rebuild Kit. This kit will replace the o-rinds and gaskets to bring your tool back to excellent working condition.

The special step pin connects to the machining door and helps to keep parts together. It is to be used in Bostitch nailers. This is an original OEM part made of metal. Pins will commonly need to be replaced when they become bent or broken. The pin is priced as an individual replacement part.

This is a genuine replacement part produced by original manufacturer. It is found in assorted models of Bostitch nailers. An O-ring prevents pressure loss by creating a flexible seal between rigid parts. Many tools use different sizes/shapes of O-ring throughout, so ensure that correct one is used. Sold individually.

The torsion spring attaches to the feed pawl. This is an authentic part from Bostitch for use in nailers. The spring is made out of metal and is priced individually. This part will need to be replaced if it becomes broken or bent. A socket set, a set of pliers, and a screwdriver may be needed during the installation process.

The metal compression spring is made of metal and goes between the check pawl and the door. This part is available as an individual replacement and is an OEM replacement part from the manufacturer Bostitch for use in nailers. Springs can lose their tension over time and will need to be replaced. A set of pliers and a socket set may be needed when replacing this spring.

This is an authentic Bostitch replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The durable plastic canister is the bottom portion of the magazine that is used to store the coiled nail strips. This item is available as an individual replacement part.