My Orders
DPPT-2600H (E60800001001 - E60800999999) Echo Hedge Trimmer - Overview
Diagrams for DPPT-2600H
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.40
In Stock
Trimmer Flange Nut
Part #43301903933
This is a genuine OEM replacement part, it is sold individually. It is used in various places on the models shown below.. It is mainly use to secure parts such as Guide Bar Covers, Sprocket Guards etc.
$6.40
In Stock
Chainsaw Chain Tensioner
Part #C309000030
This is an Authentic Part sourced from Original Manufacturer. This part is made out of Metal and it is Sold Individually. If the chainsaw bar doesn't adjust when you turn the tension screw usually the tension gear/pin or the adjustment bolt is worn or damaged.
$6.06
In Stock
Trimmer Nut
Part #90050000005
This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to secure another part in place, and should be replaced if damaged due to fatigue (such as damaged threads or rounded ends).
This nut can have v...Read morearious uses on various equipment, and as such the difficulty of the installation can vary, but generally this is an easy repair.
Read less
$6.40
In Stock
Outer Socket
Part #C509000100
This OEM socket-outer is specifically designed for use with Echo handheld pruners. It connects to the drive shaft, enabling rotation of the trimmer head. Made from durable plastic, this high-quality component is sold individually and should be replaced if it becomes worn, cracked, or damaged over time. The inner socket is sold separately....Read more Replacing the socket-outer is a straightforward process that typically requires only a screwdriver and a wrench to disassemble and reassemble the main pipe housing the drive shaft. For proper installation and application, refer to your model’s owner’s manual and diagrams.
Read less
$6.40
In Stock
Chainsaw Clutch Washer
Part #17501439131
This clutch washer, also known as a circular washer, is authentic manufacturer replacement part which is positioned on the crankshaft between the clutch drum and the engine. It is a circular metal ring with an outer diameter of 1 inch. The clutch engages with the clutch drum and sprocket to allow the chain to rotate when the engine accele...Read morerates. Over time, the clutch washer can wear out or become damaged due to normal aging, inadequate lubrication, or exposure to excessive heat. If the clutch washer is faulty, the chain will not engage or rotate properly, resulting in a loss of cutting power and poor engine performance. To access the clutch washer first remove the chain cover and bar, and then loosen and remove the clutch assembly. Carefully remove the old clutch washer and position the new one in its place. Ensure that it is properly aligned before reassembling the clutch assembly, chain, and bar.
Read less
$6.40
In Stock
Collar (8)
Part #V355000140
This component is supplied by the original equipment manufacturer for Shindaiwa and Echo lawn and garden equipment. It is an important part of the chain tensioning mechanism. Unfortunately, over time collars tend to wear out and they may begin to fail eventually requiring a replacement. Check the diagrams for your model to ensure the prop...Read moreer repair procedure. You may need a screwdriver and a wrench set to replace this component.
Read less
$67.22
In Stock
Pipe-main-orange
Part #C500000271
This is a genuine Echo replacement part used in compatible pruners. The orange main pipe attaches to the lower driveshaft assembly. When replacing this part a screwdriver and a wrench set may be needed. It is made of a durable material and will require replacing if it breaks. This item is available as an individual replacement part.
$6.40
In Stock
Cap Assembly
Part #P021005592
This replacement cap assembly is supplied directly from the original equipment manufacturer for use with Echo handheld lawn and garden equipment. It is used to keep the fuel in the tank, note this assembly includes a retainer that remains in the tank to prevent the cap from falling out. It is made of high-quality plastic material and it is sold individually.
$7.66
In Stock
Vent Assembly
Part #13131406320
This is an original Echo replacement part manufactured for use with outdoor power equipment. The vent assembly is used like a one-way valve to allow air into a fuel or oil tank to prevent a vacuum within the tank. This vent assembly is sold individually.
$6.40
In Stock
Screw 5x20
Part #V805000160
It is a genuine OEM sourced replacement part that is specially made for use with Echo handheld lawn and garden equipment. This screw has multiple applications depending on the model of your unit, please refer to appropriate diagrams for correct location and use of this hardware. It is made from high-quality metal and it is sold individually.
$7.95
In Stock
Bolt, 5
Part #V203000041
This authentic OEM replacement bolt is made for chainsaws and pole pruners. It is an important part of chain tensioning mechanism which allows users to adjust tension of the bar. If the bar doesn't adjust when you turn the tension screw usually the bolt or pin is worn or damaged. This bolt has a hex socket head requiring a hex key/allen wrench for installation. Includes one (1) bolt per order.
$6.06
In Stock
Screw 5x16
Part #V805000150
This is an authentic replacement part manufactured for use with outdoor power equipment. The screw has multiple applications depending on the model of equipment. This screw is sold as an individual replacement part please see model diagram for associative parts.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More