DPPF-2100 (E60700001001 - E60700999999) Echo Hedge Trimmer - Overview

This is a genuine OEM replacement part, it is sold individually. It is used in various places on the models shown below.. It is mainly use to secure parts such as Guide Bar Covers, Sprocket Guards etc.

This is an Authentic Part sourced from Original Manufacturer. This part is made out of Metal and it is Sold Individually. If the chainsaw bar doesn't adjust when you turn the tension screw usually the tension gear/pin or the adjustment bolt is worn or damaged.

This clutch washer, also known as a circular washer, is authentic manufacturer replacement part which is positioned on the crankshaft between the clutch drum and the engine. It is a circular metal ring with an outer diameter of 1 inch. The clutch engages with the clutch drum and sprocket to allow the chain to rotate when the engine accele...Read morerates. Over time, the clutch washer can wear out or become damaged due to normal aging, inadequate lubrication, or exposure to excessive heat. If the clutch washer is faulty, the chain will not engage or rotate properly, resulting in a loss of cutting power and poor engine performance. To access the clutch washer first remove the chain cover and bar, and then loosen and remove the clutch assembly. Carefully remove the old clutch washer and position the new one in its place. Ensure that it is properly aligned before reassembling the clutch assembly, chain, and bar.

Made specifically for repairs done on handheld lawn and garden equipment, this OEM wrench is silver and made of durable metal. It is sold individually. This wrench is sourced directly from the manufacturer and should be replaced once it becomes damaged or worn.

This component is supplied by the original equipment manufacturer for Shindaiwa and Echo lawn and garden equipment. It is an important part of the chain tensioning mechanism. Unfortunately, over time collars tend to wear out and they may begin to fail eventually requiring a replacement. Check the diagrams for your model to ensure the prop...Read moreer repair procedure. You may need a screwdriver and a wrench set to replace this component.

This replacement cap assembly is supplied directly from the original equipment manufacturer for use with Echo handheld lawn and garden equipment. It is used to keep the fuel in the tank, note this assembly includes a retainer that remains in the tank to prevent the cap from falling out. It is made of high-quality plastic material and it is sold individually.

This is an original Echo replacement part manufactured for use with outdoor power equipment. The vent assembly is used like a one-way valve to allow air into a fuel or oil tank to prevent a vacuum within the tank. This vent assembly is sold individually.

It is a genuine OEM sourced replacement part that is specially made for use with Echo handheld lawn and garden equipment. This screw has multiple applications depending on the model of your unit, please refer to appropriate diagrams for correct location and use of this hardware. It is made from high-quality metal and it is sold individually.

This authentic OEM replacement bolt is made for chainsaws and pole pruners. It is an important part of chain tensioning mechanism which allows users to adjust tension of the bar. If the bar doesn't adjust when you turn the tension screw usually the bolt or pin is worn or damaged. This bolt has a hex socket head requiring a hex key/allen wrench for installation. Includes one (1) bolt per order.

This is a genuine Echo replacement part that has been sourced from the original manufacturer to be used with pruners. The metal stud is used to mount the bar and cover plate to the gearcase assembly. The stud is priced as an individual item, please note two studs may be needed.

This is an authentic Echo replacement part manufactured for use with pole pruners and pruner attachments. The special gear is used with another gear that has a slot on one end to adjust the bar using a flat head screwdriver. This gear has a square arbor that allows the tensioning bolt to fit into it, and the gear turns the bolt which move...Read mores the chain tensioner. This gear is sold as an individual replacement part, please see model diagram for associative parts.

This is an authentic part from Shindaiwa, Echo, and Little Wonder for use in hedge trimmers, power blowers, shredder vac blowers, edgers, and brushcutters. The collar attaches to the fuel tank and is made of metal. It might require a screwdriver to replace this item if it becomes broken. This item is available as an individual replacement part.