This genuine PureSource Ultra water filter will fit most Frigidaire french door and side by side refrigerators. You will find this filter located in the back, top right of the appliance. It is white in color and the filter has a polypropylene plastic housing and extruded carbon block filter media. Certified by NSF/ANSI to reduce contamina...Read morents that may be in your household water supply by 99.8 percent. The operating temperature for this filter is 33-100 degrees Fahrenheit, the flow rate is 0.5 GPM, the working pressure is 30-100 PSI, and it has a micron rating of 1. This filter should be replaced every six months or when the indicator lights up red. Installation is quick and easy. Push on the end face of the older filter to allow it to release. Remove and discard the old filter. Slide the new filter into the housing and press it down until it locks into place. Be sure to run water through the dispenser for about three minutes to prime the filter before use. Discard this water or use it to water plants. Do not forget to reset the indicator by pressing it down for 3-10 seconds. Review the use and care guide before you install for more detailed instructions.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
needed to replace filter
11 of 17 peoplefound this instruction helpful.
Wayne from Homosassa, FL
Really Easy
Less than 15 mins
push in old filter, turned to the left and filter came out. Pushed in new filter and it clicked into place. Very easy to do.
Was this helpful?
Thank you for voting!
Replaced the water filter
6 of 6 peoplefound this instruction helpful.
Gaylan from ALEDO, TX
Very Easy
Less than 15 mins
Removed the previous water filter. Installed the new water filter. I then filled a large glass full of water from the water dispenser several times to clear the air from the filter and lines.
Time to install, less than 8 minutes.
Thank you Parts Select!
Was this helpful?
Thank you for voting!
time to change water filter
2 of 6 peoplefound this instruction helpful.
Ronald from Warrensburg, MO
Really Easy
30 - 60 mins
first, there many different water filters. your experience will be different according to your water filter type.